Sony DXC-990 User Manual

Page of 180
DXC-990/990P
3-205-543-11 (1)
D:\Nouhin\DXC990UC\320554311DXC990UC\02GB-
DXC990UC\04ADJ.fm
masterpage:Left
21
 GB
SYSTEM Menu
Ad
ju
st
ing an
d Se
tti
ng w
ith
 M
enu
s
RGB
Adds sync signals to the G, B and R signals 
output from the RGB/SYNC 
 
connector.
Switches the input and output of the 
 DC 
IN/VBS 
 connector (12-pin) and selects 
the output signal.
IN
Functions as the input connector.
OUT
Functions as the output connector.
SIGNAL 
Selects the output signal from the 
 DC 
IN/VBS  
connector.
HD/VD:
 Outputs the HD/VD signal.
C. SYNC:
 Outputs the composite sync 
signal.
When the CMA-D3/C3CE is connected to 
the camera with the CCMC-3MZ connecting 
cable, you cannot set this item. Switch 
between input and output with the IN/OUT 
switch on the CMA-D3/D3CE camera 
adaptor.
For details, refer to the operating 
instructions of the CMA-D3/D3CE.
The following items appear. 
Adjusts the horizontal phase and SC 
(subcarrier) phase to synchronize the camera 
operation with the reference signal.
H. PHASE
Adjusts the horizontal phase within the 
range from –20 to +127.
SC. PHASE ROUGH
Roughly adjusts the subcarrier phase by 
setting to 0° or 180°.
SC. PHASE FINE
Finely adjusts the subcarrier phase within 
the range from –127 to +127.
The following item appears. 
Adjusts the horizontal phase to synchronize 
the camera operation with the reference 
signal.
H. PHASE
Adjust the level within the range from –20 to 
+127.
Turn on the external sync signal generator 
after all equipment is switched on.
12P CONNECTOR
Note
When an External Sync 
Signal (VBS Signal) Is Input 
(VBS Lock)
When an External Sync 
Signal (HD/VD Signal) Is Input 
(HD/VD Lock)
Note