Sony DXC-390 User Manual
Chapter 1 Overview
11
(GB)
Chapter 1
Rear Panel
VIDEO OUT
DC IN/VBS
REMOTE
LENS
TRIG IN
MENU LOCK
OFF
ON
RGB/SYNC
1
MENU LOCK ON/OFF switch
2
DC IN/VBS
connector
3
TRIG IN connector
4
LENS connector
5
VIDEO OUT
connector
6
REMOTE
connector
7
RGB/SYNC connector
1
MENU LOCK ON/OFF switch
When this switch is set to ON, the menu is not displayed on
the screen even if you press the MENU button.
the screen even if you press the MENU button.
2
DC IN/VBS
(DC input/video signal output)
connector (12-pin)
Connects to the CMA-D2/D2MD/D2CE/D2MDCE camera
adaptor. Inputs the DC power and outputs the video signal.
adaptor. Inputs the DC power and outputs the video signal.
3
TRIG IN connector (BNC type)
Connects to a commercially available slave unit by
converting to BNC type in strobe mode.
converting to BNC type in strobe mode.
4
LENS connector (6-pin)
Connects to a lens control cable when attaching the zoom
lens especially designed for this camera.
lens especially designed for this camera.
5
VIDEO OUT
connector (BNC type)
Outputs a composite video signal.
6
REMOTE
connector (mini DIN 8-pin)
Connects to the RM-C950 remote control unit (not
supplied).
supplied).
7
RGB/SYNC connector (D-sub 9-pin)
Outputs RGB signals and their respective sync signals.
Use the CCXC-9DB/CCXC-9DD/CCMC-9DS connecting
cable for the connections.
Use the CCXC-9DB/CCXC-9DD/CCMC-9DS connecting
cable for the connections.