Sony ERS-7M2 User Manual

masterpage:Right

date[9/28/04]

filename[F:\Joutou\#4080187_Sony_AiboMIND2_PCNET_E\AC27100111\GB07_ADD0

2.fm]

model name[ERS-7]

partnumber[A-C27-100-11 (1)]

56

This list explains each parameter in the wireless LAN configuration file.

HOSTNAME

Defines the name the AIBO

®

 Entertainment Robot uses on the wireless network. This name can be up to 

8 alphanumeric characters and must contain at least one letter.

ESSID

The name of the wireless network. Up to 32 alphanumeric characters and symbols are allowed.

WEPENABLE

Sets whether to use WEP (wireless encryption system). Set this value to 0 if disabled, and 1 if enabled.

WEPKEY

Sets the WEP key (wireless passkey). Alphanumeric passkeys must be 5 or 13 characters. Hexadecimal 
passkeys must be 10 or 26 characters (0-9, A-F, a-f). (Supports WEP64 (40 bit) and WEP128 (104 bit)
If using WEP64, use 5 alphanumeric characters, or “0x” followed by 10 hexadecimal characters.
If using WEP128, use 13 alphanumeric characters, or “0x” followed by 26 hexadecimal characters.
Example: For WEP64 (40 bit)
String: WEPKEY=AIBO2
Hexadecimal: WEPKEY=0x4149424f32

APMODE

Sets the wireless LAN mode for the AIBO robot. For AIBO EYES feature, set this value to 1 (connect in 
Infrastructure mode).

ETHER_IP

Set the AIBO robot’s IP address.
This parameter must be specified when the USE_DHCP value is set to 0.

ETHER_NETMASK

Sets the IP subnet mask.
This parameter must be specified when the USE_DHCP value is set to 0.

IP_GATEWAY

Sets the gateway IP address. If a gateway is not present on the network, set this value to be the same as 
the ETHER_IP address.
This parameter must be specified when the USE_DHCP value is set to 0.

DNS_SERVER_1

Sets the DNS server IP address.
This parameter must be specified when the USE_DHCP value is set to 0.

USE_DHCP

Defines whether to use DHCP (Dynamic Host Configuration Protocol) to automatically assign the AIBO 
robot an IP address. Set this value to 0 if disabled, and 1 if enabled.