Sony GV-HD700E User Manual

Page of 112
33
Bas
ic
 Op
erat
ions
3
Press REW m 1.
The tape stops automatically when the 
tape counter reaches “0:00:00”.
The tape counter returns to the time 
code display, and 
 disappears.
4
Press PLAY 6.
Playback starts from the point 
designated “0:00:00” on the tape 
counter.
b
Notes
• There may be a discrepancy of several seconds 
between the time code and the tape counter.
• The zero set memory function will not work 
correctly when there is a blank section between 
recorded sections on the tape.
• During setting the zero set memory function, it 
is automatically canceled when you perform the 
following operations:
– Pressing MEMORY PHOTO
– Performing the end search
– Performing the index search
z
Tips
• When setting [ZEROMEMORY] to ASSIGN 
buttons (p. 36), you can use the zero set memory 
function on the VCR without using the Remote 
Commander.
To cancel the operation
Press ZERO SET MEMORY 4 again 
before rewinding.
Press END SEARCH 8.
The last scene of the most recent recording 
is played back for about 5 seconds.
b
Notes
• Once you eject the tape, the end search will not 
function.
• The end search function does not function 
correctly, if a blank section between recorded 
sections on the tape is detected.
z
Tips
• When setting [END SEARCH] to ASSIGN 
buttons (p. 36), you can use the end search 
function on the VCR without using the Remote 
Commander.
You can locate the point where the 
recording date changes.
1
Press SEARCH SELECT 2 
repeatedly to select [DATE 
SEARCH].
2
Press . (previous)/> (next) 
5 to select a recording date.
You can select the previous or the next 
date of the present point on the tape.
Playback starts automatically from the 
point where the date changes.
b
Notes
• The date search functions only with the tape 
recorded with date data.
• You need to record more than 2 minutes after 
the date is changed. The VCR may not 
accurately detect the point where the recording 
date changes.
• The date search function will not function 
correctly, if a blank section between recorded 
sections on the tape is detected.
Searching for the last scene of 
the most recent recording (End 
search)
Searching for a scene by date of 
recording (Date search)
Continued 
,