Sony fd trinitron wega kv-dr34m69 User Manual

33

Additional Information

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup.

Contact a Sony dealer for advice.

• Display the “CH PRESET” menu and

select “MANUAL PROGRAM” to preset
the channel again.

• Try using a booster.

• Display the “CH PRESET” menu and

select “MANUAL PROGRAM”.
Then, select “

 SENS: LOW”.

• Turn off or disconnect the booster if it is in

use.

• Display the “CH PRESET” menu and

select the appropriate TV system
(“TV SYS”).

• Press SOUND or  

.

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• Channel presetting is

inappropriate or
incomplete.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate.

• PIP sound is selected

when PIP is displayed.

x

If you have any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.

Press the RESET button on your remote control.
Your TV will go blank for about half a second
then the picture will reappear with “RESET”
displayed on your TV screen for about 10 seconds.

Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.

31

–

29

–

30

–

29

13