Sony hcd-101 User Manual
32
Before you start
recording
recording
(for the customers who purchased
MDS-MX101 only)
MDS-MX101 only)
To
Add a track at
the end of the
programme
the end of the
programme
Clear the entire
programme
programme
Clear the last
programme
programme
Do this
Do step 3 in stop mode.
Press p in stop mode.
Press CLEAR.
Each time you press the
button, the last track of the
programme is cleared.
Each time you press the
button, the last track of the
programme is cleared.
Programming the MD tracks
–– Programme Play (continued)
–– Programme Play (continued)
To change the programme
Tip
The programme you made remains after the
Programme Play has finished. To play the same
programme again, press ^ (MD ( on the
remote).
Programme Play has finished. To play the same
programme again, press ^ (MD ( on the
remote).
Notes
• The programme is cleared by pressing 6 on MD
deck to eject the disc.
• “--m--s” appears when the total programme time
exceeds 100 minutes.
MDs (Mini Disc) let you digitally record and
play back music with high quality sound that
compares with the sound of CDs.
play back music with high quality sound that
compares with the sound of CDs.
After recording
Be sure to remove an MD after recording
because programme you made is put on
record on an MD when an MD is removed.
Be sure to remove an MD after recording
because programme you made is put on
record on an MD when an MD is removed.
About track making feature
The track making feature lets you quickly
locate a specific point or easily edit the
recorded tracks. However, depending on the
source you record, the recording method
varies.
The track making feature lets you quickly
locate a specific point or easily edit the
recorded tracks. However, depending on the
source you record, the recording method
varies.
Also, the way the track numbers are recorded
differs depending on the source.
differs depending on the source.
When the source you record from is:
• This system’s CD player
– The digital signal from the CD is recorded as it is
(digital recording
*1
).
– Track numbers are automatically marked as on the
original CD.
• Other digital components
(e.g., a DAT deck)
– The digital signal is converted to an analog signal
– The digital signal is converted to an analog signal
once, then re-converted to a digital signal and
recorded
recorded
*2
(analog recording).
– A track number is marked at beginning of
recording, but when you turn on the Level Sync
function (see page 38), track numbers are
automatically marked in sync with the level of the
input signal.
function (see page 38), track numbers are
automatically marked in sync with the level of the
input signal.