Sony hcd-101 User Manual

Press TIMER +/– to select what you
want to record on, and press
ENTER.

To record on a tape, display “REC to
TAPE”.
To record on an MD, display “REC to
MD” or “REC to MD (MONO)”*.
The preset items appear in the display
sequentially.

Press TIMER SET.

The source you selected (MD deck or
cassette deck) is not connected correctly.
Check the connection and do step 9
again.

  Press POWER to turn off the
power.

The system stands by for recording.
When the time to start recording, the
power is on and recording starts.  When
the time to stop recording, the power is
off and the timer is released.  The
volume is reduced to minimum during
recording and stays the same even after
recording.

* “REC to MD (MONO)”: Though the sound is

recorded in monaural, the time you can record
becomes double.

Press TIMER SELECT repeatedly until “REC”
disappears and “TIMER OFF” appears.  The
start time, followed by the stop time and the
preset number appears, then the original
display appears.

Press TIMER SELECT repeatedly until
“TIMER OFF” appears.

Start again from step 1.

Press TIMER SELECT until  “REC” appears
and press POWER to turn off the system.
Once you set the timer, you do not have to set
the same items again.

If the recordable time for the MD comes to the end
while timer recording, the recording will stop
immediately, and the deck will stop.