Sony hcd-101 User Manual
5
Connect the speakers.
Connect the speaker cords to the speaker
jacks. Be sure to keep the speaker cable
away from the aerials.
jacks. Be sure to keep the speaker cable
away from the aerials.
the rear side of the tuner CD player
the rear side of the speaker SS-Q101/
Q101A
Q101A
Make sure if the speaker cords are
connected firmly by pulling the speaker
cords lightly. When they come off,
connect them again.
connected firmly by pulling the speaker
cords lightly. When they come off,
connect them again.
Connect the cassette deck.
(for the customers who purchased
TC-TX101 only)
Connect the system cord of the cassette
deck to the TAPE jack of the tuner CD
player in the same way as 1
TC-TX101 only)
Connect the system cord of the cassette
deck to the TAPE jack of the tuner CD
player in the same way as 1
-1
.
Connect the FM/AM aerials.
FM lead aerial
The supplied FM lead aerial is the
simplified aerial. For better reception,
using the optional FM external aerial is
recommended.
The supplied FM lead aerial is the
simplified aerial. For better reception,
using the optional FM external aerial is
recommended.
AM loop aerial
Set up the AM loop aerial, then connect
it.
Set up the AM loop aerial, then connect
it.
Extend the FM lead aerial
up vertically as high as
possible.
up vertically as high as
possible.
2
4
3
Insert the plug with the convex
slot on the right into the socket
until it clicks.
slot on the right into the socket
until it clicks.
continued
Black (})
Gray (])
This part should be inserted.
Gray (])
This part should be inserted.
Black (})
Gray (])
FM 75
Ω