Sony cmt-101 User Manual
64
Tuner
Severe hum or noise (“TUNED” or
"STEREO" flashes in the display.).
"STEREO" flashes in the display.).
•Adjust the aerial.
•The signal strength is too weak. Connect
•The signal strength is too weak. Connect
the external aerial.
A stereo FM programme cannot be
received in stereo.
received in stereo.
•Press STEREO/MONO so that “STEREO”
appears.
MD messages
(for the customers who purchased
MDS-MX101 only)
MDS-MX101 only)
One of the following messages may appear or
flash in the display window during MD
operation.
flash in the display window during MD
operation.
Auto cut
The MD deck is pausing the recording
because silence continued for 30 seconds or
more during digital recording.
because silence continued for 30 seconds or
more during digital recording.
Blank Disc
The inserted recordable MD is brand new
or all tracks on the MD have been erased.
or all tracks on the MD have been erased.
Cannot Copy
You cannot make a digital recording (See
“Guide to the Serial Copy Management
System” on page 61).
“Guide to the Serial Copy Management
System” on page 61).
Cannot Edit
You tried to edit in Programme or Shuffle
Play mode.
Play mode.
CHECK OPT-IN
The digital signal input was interrupted
during recording. Connect the optical cable
securely (see page 4).
during recording. Connect the optical cable
securely (see page 4).
Disc Error
The inserted MD is damaged or does not
contain a TOC.
contain a TOC.
Disc Full
There is no time remaining on the disc (See
“System Limitations of MDs” on page 61).
“System Limitations of MDs” on page 61).
Impossible
You tried to combine from the first track on
an MD, which is not possible.
an MD, which is not possible.
Name Full
There is no more space to store track or
disc titles.
disc titles.
NO DISC
There is no MD in the MD deck.
Protected
The inserted MD is protected against
erasure.
erasure.
Rec Level Over
A high-level signal was input during
analog recording with VIDEO/PC input
jack.
Adjust the level of the connected
equipment.
analog recording with VIDEO/PC input
jack.
Adjust the level of the connected
equipment.
Retry
The MD deck is redoing the recording
because of vibrations or disc scratches
encountered during recording.
because of vibrations or disc scratches
encountered during recording.
Retry Error
Due to vibration affecting the MD deck or
scratches on the MD, several recording
attempts were made but with no success.
scratches on the MD, several recording
attempts were made but with no success.
Smart Space
The signal was input again after silence
continued for 3 to 30 seconds or less during
digital recording.
continued for 3 to 30 seconds or less during
digital recording.
Sorry
You tried to combine tracks that cannot be
combined.
combined.
Troubleshooting (continued)