Sony HD1000P User Manual

Insert the recorded cassette.
Slide the POWER switch to PLAY/
EDIT.

If your recording device has an input 
selector, set it to the appropriate input 
(such as video input1 and video input2).

See page 68 for connection details.

Refer to the operating instructions 
supplied with your recording device for 
details.

b

• When connecting with an A/V connecting cable, 

set [VIDEO OUT] according to the playback 
device (TV, etc.).

• To record the date/time and camera settings data 

when connected by the A/V connecting cable, 
display them on the screen (p. 64).

• The following cannot be output via the   HDV/

DV interface (i.LINK):
– Indicators
– Pictures edited with [PICT.EFFECT] (p. 57) 

or [D.EFFECT] (p. 56)

– Titles that are recorded on other camcorders

• Pictures recorded in the HDV format are not 

output from the   HDV/DV Interface (i.LINK) 
during playback pause or in any playback mode 
other than normal playback.

• Note the following when connecting with an 

i.LINK cable:
– The recorded picture becomes rough when a 

picture is paused on your camcorder while 
recording to a VCR or DVD/HDD recorder.

– Data codes (date/time/camera settings data) 

may not be displayed or recorded depending 
on the device or application.

– You cannot record the picture and sound 

separately.

• When dubbing to a DVD recorder from your 

camcorder through an i.LINK cable, you may 
not operate your camcorder on your DVD 
recorder even if its instruction manual says you 
can. 
If you can set the input mode to HDV or DV on 
your DVD recorder and can input/output 
pictures, follow the steps in “Dubbing to another 
device.”

• When you use an i.LINK cable, the video and 

sound signals are transmitted digitally, 
producing high quality pictures.

• When an i.LINK cable is connected, the format 

of the output signal (

 

 or 

 

) will be indicated on the LCD screen of 

your camcorder.