Sony HD1000P User Manual

Page of 120
84
Menu items are grayed out.
• You cannot select grayed items in the 
current recording/playback situation.
• Depending on the functions, you may not 
be able to use them together (p. 89).
You cannot turn off the indicator.
• You cannot turn off 
. Touch 
 to 
check the warning messages (p. 92).
The buttons do not appear on the 
touch panel.
• Touch the LCD screen lightly.
• Press DISPLAY/BATT INFO on your 
camcorder (p. 25).
The buttons on the touch panel do 
not work correctly or do not work at 
all.
• Adjust the touch panel ([CALIBRATION]) 
The picture in the viewfinder is not 
clear.
• Move the viewfinder lens adjustment lever 
until the picture appears clearly (p. 25).
The LCD screen does not turn on.
• Set the LCD ON/OFF switch to ON.
The cassette cannot be ejected from 
the compartment.
• Make sure the power source (battery pack 
or AC Adaptor) is connected correctly 
(p. 21).
• Moisture condensation has occurred inside 
the camcorder (p. 101).
The Cassette Memory indicator or 
title display does not appear while 
using a cassette with Cassette 
Memory.
• This camcorder does not support Cassette 
Memory, so the indicator does not appear.
The remaining tape indicator is not 
displayed.
• Set [
 REMAINING] to [ON] to always 
display the remaining tape indicator (p. 64).
The cassette is noisier during 
rewinding or fast-forwarding.
• When using the AC Adaptor, rewind/fast 
forward speed increases (compared with 
battery operation) and therefore increases 
noise. This is not a malfunction.
You cannot operate functions using 
a “Memory Stick Duo,” even if a 
“Memory Stick Duo” is inserted.
• Slide the POWER switch to MEMORY or 
• If you use a “Memory Stick Duo” formatted 
on a computer, format it again on your 
camcorder (p. 53).
You cannot delete the recorded 
picture on the tape.
• You cannot delete a recorded picture on 
tape; you can only rewind the tape and 
record again. The new recording overwrites 
the existing one.
LCD screen/viewfinder
Cassette tapes/“Memory Stick 
Duo”
Troubleshooting (Continued)