Sony HD 3CCD User Manual
Ov
er
v
er
v
ie
w
Location and Function of Parts
26
C HD-SDI connector (BNC type)
Supplies HD-SDI signals that conform to the
SMPTE292M serial digital interface standards. The
two connectors output the same signal.
SMPTE292M serial digital interface standards. The
two connectors output the same signal.
HFBK-XG1 XGA Interface Board
(not supplied)
(not supplied)
A MONITOR connector (D-sub 15-pin)
Supplies video signals after conversion to VGA,
XGA or WXGA. The standards of output signal
and aspect ratio can be specified in the PC-
OUTPUT menu.
XGA or WXGA. The standards of output signal
and aspect ratio can be specified in the PC-
OUTPUT menu.
B DIP switches (inside the cap)
When this interface board is inserted into the BRC-
H700 camera or the BRU-H700 HD Optical
Multiplex Unit, the DIP switches cannot be used.
H700 camera or the BRU-H700 HD Optical
Multiplex Unit, the DIP switches cannot be used.
HFBK-TS1 HDV Interface Board
(not supplied)
(not supplied)
A AUDIO L/R jacks (phono type)
Input audio signals (stereo).
The input audio signals are converted into signals
that comply with HDV standards.
The input audio signals are converted into signals
that comply with HDV standards.
B DIP switches (inside the cap)
When this interface board is inserted into the BRC-
H700 camera or the BRU-H700 HD Optical
Multiplex Unit, the DIP switches cannot be used.
H700 camera or the BRU-H700 HD Optical
Multiplex Unit, the DIP switches cannot be used.
C i.LINK (HDV) OUT connector (i.Link 6-pin)
Supplies video and audio signals after they are
converted to comply with HDV standards.
converted to comply with HDV standards.
Note
The audio input on this board accepts audio line signals
only. When you input audio signals from a microphone,
etc., it should be connected with a microphone amplifier
so that audio signals with an appropriate audio level can
be input.
only. When you input audio signals from a microphone,
etc., it should be connected with a microphone amplifier
so that audio signals with an appropriate audio level can
be input.
BRBK-H700 HD Optical Multiplex
Card (not supplied)
Card (not supplied)
A AUDIO IN L/R jacks (phono type)
Input an audio signal (stereo) that is output from the
AUDIO OUT jacks on the BRBK-H700 HD
Optical Multiplex Unit via the Optical Fiber Cable.
AUDIO OUT jacks on the BRBK-H700 HD
Optical Multiplex Unit via the Optical Fiber Cable.
Note
The audio input on this board accepts audio line
signals only. When you input audio signals from a
microphone, etc., it should be connected with a
microphone amplifier so that audio signals with an
appropriate audio level can be input.
signals only. When you input audio signals from a
microphone, etc., it should be connected with a
microphone amplifier so that audio signals with an
appropriate audio level can be input.
B Optical connector
Performs the optical digital multiplex transmission
of video, audio, external sync and control signals.
A dustproof cap is attached at the factory.
of video, audio, external sync and control signals.
A dustproof cap is attached at the factory.
MONITOR
HFBK-XG1
1
2
AUDIO
HFBK-TS1
L
R
i.LINK (HDV) OUT
3
2
1
AUDIO IN
BRU-H700
BRBK-H700
L
R
2
1