Sony HCD-GX8800 User Manual

MHC-GN800    4-244-569-11 (1)

GB

POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:

With 6-ohm loads, both channels driven, from
120 Hz – 10 kHz; rates 200 watts per channel
minimum RMS power, with no more than 10% total
harmonic distortion from 250 miliwatts to rated
output.

MHC-GX8800
Total harmonic distortion

Less than 0.1%
(6 ohms at 1 kHz, 100 W)

MHC-GN900
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
DIN power output (rated) 205 + 205 watts

(4 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

275 + 275 watts
(4 ohms at 1 kHz, 10%
THD)

The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding etc.
frequently. The tape may get entangled in the tape
deck.

Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.

Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.

MHC-GN800 (HCD-GN800)
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
DIN power output (rated) 170 + 170 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

220 + 220 watts
(6 ohms at 1 kHz, 10%
THD)

MHC-GN800 (SS-WG800)
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
Continuous RMS power output (reference)

180 watts
(8 ohms at 100 Hz, 10%
THD)

MHC-GN700
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
DIN power output (rated) 160 + 160 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

200 + 200 watts
(6 ohms at 1 kHz, 10%
THD)

MHC-GN600
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
DIN power output (rated) 130 + 130 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

165 + 165 watts
(6 ohms at 1 kHz,
10% THD)

Inputs
GAME (VIDEO):

1 Vp-p, 75 ohms

(phono jack)
GAME (AUDIO):

Voltage 250 mV,

(phono jacks)

impedance 47 kilohms

MD/VIDEO (AUDIO) IN: voltage 450 mV/250 mV,
(phono jacks)

impedance 47 kilohms

MIC:

sensitivity 1 mV,

(phone jack)

impedance 10 kilohms

Outputs
VIDEO OUT:

max. output level 1 Vp-p,

(phono jacks)

unbalanced, Sync.
negative load impedance
75 ohms

PHONES:

accepts headphones of

(stereo mini jack)

8 ohms or more

FRONT SPEAKER:

accepts impedance of 6 to
16 ohms

SURROUND SPEAKER: accepts impedance of
(MHC-GN800/GN700/

24 ohms or more

GX8800 only)
SUBWOOFER:

accept impedance of

(MHC-GN800 only)

8 ohms or more