Sony HCD-GX8800 User Manual

Page of 36
MHC-GN800    4-244-569-11 (1)
Getting Started
9
GB
Inserting two R6 (size AA)
batteries into the remote
E
e
e
E
R6 (AA)
batteries
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Setting the clock
1
Press ?/1 to turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
3
Press 
or m repeatedly to set the hour.
4
Press PUSH ENTER (or ENTER on the
remote).
5
Press 
or m repeatedly to set the
minute.
6
Press PUSH ENTER (or ENTER on the
remote).
The clock starts functioning.
To adjust the clock
1
Press CLOCK/TIMER SET on the
remote.
2
Press 
or m repeatedly to select
“CLOCK SET?” and then press PUSH
ENTER (or ENTER on the remote).
3
Do the same procedure as steps 3 to
6 above.
Note
The clock settings are cancelled when you disconnect
the power cord or if a power failure occurs.
Front
speaker
(L)
Front
speaker
(R)
45º
Surround
speaker
(L)
Surround
speaker
(R)
Main Unit Subwoofer *
0.3m
Positioning the speakers
(Except for MHC-GN900/GN600)
Place the front speakers at an angle of 45
degrees from your listening position.
* (MHC-GN800 only)
Place the subwoofer at least 0.3 meters (1 feet)
away from the main unit.
Notice for carrying this system
Do the following to protect the CD
mechanism.
1
Make sure that all discs are removed
from the main unit.
2
Hold down CD and then press ?/1 until
“LOCK” appears in the display.
3
Release ?/1 first, then release CD.
4
Unplug the AC power cord.