Sony CX700V User Manual

Sony

Table of C

on

ten

ts

Enjo

y U
seful F

unc
tions

Inde
x

US

720p/480p

Outputs high definition image quality (HD)

movies with a 720p signal and standard image

quality (STD) movies with a 480p signal.

480p

Outputs the 480p signal.

480i

Outputs the 480i signal.

Notes

When [

Frame Rate] is set to [60p] and

[HDMI Resolution] is set to [720p/480p] or

[480p], HDMI signals cannot be output during

recording.

CTRL FOR HDMI (Control for
HDMI)

When connecting your camcorder to a

“BRAVIA” Sync compatible TV with a

HDMI cable (sold separately), you can play

back movies on your camcorder by aiming

the TV’s Remote Commander at the TV

 On

Operates your camcorder using the TV’s

Remote Commander.

Off

Does not operate your camcorder using the

TV’s Remote Commander.

USB Connect

Select this item when [USB Select] does not

appear on the LCD screen by connecting

the camcorder to a computer with the

Built-in USB Cable.

See page 70.





USB Connect Setting

You can set the USB transfer mode for

connecting the camcorder to a computer or

other USB device.

 Auto

The camcorder automatically selects the USB

transfer mode depending on the connected

device.

Mass Storage

This is a USB transfer mode compatible to

many types of USB devices.

MTP

This is a USB transfer mode compatible with

certain types of computers.

Notes

When you connect the camcorder to other

devices using the [MTP] mode, movies that

have been recorded with the same image quality

as the one currently selected (selected with

the [

/

Setting] menu) can only be

displayed on the connected device.

When the camcorder is connected to an

external device in the [MTP] mode, movie

files will be displayed with the recorded

date, however, some information, such as

area information, included in the movie files

cannot be displayed on the connected device.

To import images from the camcorder to your

computer, use the supplied “PMB” software.

If the “Device Stage

*

” window does not open

when you connect the camcorder to a computer

equipped with Windows 7, set [USB Connect

Setting] to [Auto].

* “Device Stage” is a menu of Windows 7, that is

used to manage devices (camcorder, camera,

etc.) that are connected to the computer.







