Sony HDW-S2000 User Manual
Appendix
A-4
Appendix
Specifications
Processor adjustment range
Video level
±3 dB/ –
∞ to +3 dB selectable
Chroma level
±3 dB/ –
∞ to +3 dB selectable
Setup level (59.94i, 29.97PsF mode)
±30 IRE
Black level (50i, 25PsF mode)
±210 mV
Chroma phase
±30°
System phase
Sync: ±15 µs
SC: ±200 ns
SC: ±200 ns
Input connectors
HDSDI INPUT
BNC (1 each for input and for
through output to a monitor)
Serial digital (1.485 Gbits/s)
SMPTE 292M
SMPTE 292M
SDTI INPUT
BNC (1) (optional)
SMPTE 305M (SDTI)
SMPTE 305M (SDTI)
REF. VIDEO INPUT
BNC (2 in loop through
connection)
Black burst or composite sync
0.3 Vp-p, 75
0.3 Vp-p, 75
Ω, sync negative
AUDIO INPUT CH1/2/3/4
XLR 3-pin, female (4)
LOW OFF: –60 dBu, high
LOW OFF: –60 dBu, high
impedance, balanced
HIGH OFF: +4 dBu, high
impedance, balanced
HIGH ON: +4 dBm, 600
Ω
termination, balanced
CUE IN
XLR 3-pin, female (1)
LOW OFF: –60 dBu, high
LOW OFF: –60 dBu, high
impedance, balanced
HIGH OFF: +4 dBu, high
impedance, balanced
HIGH ON: +4 dBm, 600
Ω
termination, balanced
AUDIO INPUT(AES/EBU) CH1/2, 3/4
BNC (2)
Complies with AES-3id-1995
Complies with AES-3id-1995
TIME CODE IN
XLR 3-pin, female (1)
0.5 to 18 Vp-p, 10 k
0.5 to 18 Vp-p, 10 k
Ω, balanced
Output connectors
HDSDI OUTPUT
BNC (3 including 1 for character
superimposition)
Serial digital (1.485 Gbits/s)
SMPTE 292M
SMPTE 292M
SDTI OUTPUT
BNC (2) (optional)
SMPTE 305M (SDTI)
SMPTE 305M (SDTI)
COMPONENT VIDEO OUTPUT
BNC (3 for 1 set)
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75
Ω, with
100% or 75% color bar selectable
COMPOSITE VIDEO OUTPUT
BNC (3 including 1 for character
superimposition)
1.0 Vp-p, 75
Ω, Sync negative
SDI OUTPUT
BNC (3 including 1 for character
superimpositon)
Serial digital (270 Mbits/s)
SMPTE 259 M
SMPTE 259 M
AUDIO OUTPUT CH1/2/3/4
XLR 3-pin, male (4)
+4 dBm at 600
+4 dBm at 600
Ω load, low
impedance, balanced
CUE OUT
XLR 3-pin, male (1)
+4 dBm at 600
+4 dBm at 600
Ω load, low
impedance, balanced
AUDIO OUTPUT (AES/EBU) CH1/2, 3/4
BNC (2)
Complies with AES-3id-1995
Complies with AES-3id-1995
MONITOR OUTPUT (L/R)
XLR 3-pin, male (2)
+4 dBm at 600
+4 dBm at 600
Ω load, low
impedance, balanced
TIME CODE OUT
XLR 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
2.2 Vp-p, low impedance, balanced
PHONES
JM-60 stereo phone jack
–
–
∞ to –12 dBu at 8 Ω load,
unbalanced
Remote connectors
CONTROL PANEL
10-pin (2), female
Front/rear selectable
Front/rear selectable
REMOTE 1-IN(9P)
D-sub 9-pin, female