Sony HDW-S2000 User Manual

Chapter 2

Location and Function of Parts

Chapter 2

Location and Function of Parts

2-17

2  Analog video input/output section

1

Ω termination switch

Input a reference video signal.  Input a three-valued
(positive and negative) sync signal, a video signal with
chroma burst (VBS) or a monochrome video signal
(VS).  When using the loop-through connection set the
switch to the OFF position, and otherwise to the ON
position.

2

(BNC type)
These connectors output analog component video
signals (Y/R–Y/B–Y).

3

(BNC type)
These connectors output analog composite video
signals.
When the setting of F4 (CHARA) in function menu
page 4 is ON, connector 3 (SUPER) outputs a signal
with superimposed time code, menu settings, alarm
messages, and other text information.

Ω

1

 REF.VIDEO INPUT connectors

and 75

Ω termination switch

3  Digital audio input/output section

1

type)
Input two sets (4 channels: CH1/2 and CH3/4) of AES/
EBU format digital audio signals.

2

type)
Output a maximum of 4 sets (4 channels: CH1/2,
CH3/4) of AES/EBU format digital audio signals.

1

 AUDIO INPUT (AES/EBU) connectors

2

 AUDIO OUTPUT (AES/EBU) connectors

2

 COMPONENT VIDEO

OUTPUT connectors

3

 COMPOSITE VIDEO

OUTPUT connectors