Sony ht ddw1600 User Manual

V/v repeatedly to select 

b to enter the 

The cursor flashes and you can select a 
character. Follow the procedure given in 
“To create an index name” below.

Use 

V/v/B/b to create an index name.

Press 

V/v to select a character, then press  

B/b to move the cursor to the next position.

Press 

B/b until the character you want to 

change flashes, then press 

V/v to select the 

correct character.

• You can select the character type as follows by 

pressing 

V/v. 

Alphabet (upper case) 

t Numbers t 

Symbols

• To enter a blank space, you can

– press 

V/v repeatedly until a blank space 

appears in the display.

– press 

b

 without input a character.

Press .

 

The entered name is registered.

 

You can select the audio input mode by setting 
the audio input mode when you connect 
components to both digital and analog audio 
input jacks on the receiver. 

You can also use the input buttons on the 
remote.

The selected audio input mode appears on 
the display.

• AUTO IN

Gives priority to digital audio signals when 
there are both digital and analog 
connections. If there are no digital audio 
signals, analog audio signals are selected.

• COAX IN

Specifies the digital audio signals input to 
the DIGITAL COAXIAL jack.

• OPT  IN

Specifies the digital audio signals input to 
the DIGITAL OPTICAL jack.

• ANALOG

Specifies the analog audio signals input to 
the AUDIO IN (L/R) jacks.

Some audio input modes may not be set up 
depending on the input.