Sony hi-md walkman mz-nh600 User Manual

Page of 112
61
Additional information
Precautions
On safety
Do not put any foreign objects in the DC IN 3V 
jack (The AC power adaptor is an optional 
accessory).
On power sources
Use house current or LR6 (size AA) battery.
If you are not going to use this recorder for a 
long time, be sure to disconnect the power 
supply.
On heat build-up
Heat may build up in the recorder if it is used 
for an extended period of time. This, however, 
is not a malfunction.
On installation
If you use the recorder at a place subject to 
static or electrical noise, the recording may 
not be properly done or the recorded data may 
be lost. If you perform a transfer operation at 
such a place, the track’s transfer authorization 
may be lost.
Never use the recorder where it will be 
subjected to extremes of light, temperature, 
moisture or vibration.
Never wrap the recorder in anything when it is 
being used with the AC power adaptor (not 
supplied). Heat build-up in the recorder may 
cause malfunction or damage.
On the headphones/earphones
Road safety
Do not use headphones/earphones while 
driving, cycling, or operating any motorized 
vehicle. It may create a traffic hazard and is 
illegal in many areas. It can also be potentially 
dangerous to play your recorder at high volume 
while walking, especially at pedestrian 
crossings. You should exercise extreme caution 
or discontinue use in potentially hazardous 
situations.
Preventing hearing damage
Avoid using headphones/earphones at high 
volume. Hearing experts advise against 
continuous, loud and extended play. If you 
experience a ringing in your ears, reduce the 
volume or discontinue use.
Caring for others
Keep the volume at a moderate level. This will 
allow you to hear outside sounds and to be 
considerate of the people around you.
On the MiniDisc cartridge
When carrying or storing the MiniDisc, keep 
it in its case.
Do not break open the shutter.
Do not place the cartridge where it will be 
subject to light, extreme temperatures, 
moisture or dust.
Attach the supplied disc label only in the 
space designated for it on the disc. Do not 
stick it on any other disc surface.
On cleaning
Clean the recorder casing with a soft cloth 
slightly moistened with water or a mild 
detergent solution. Do not use any type of 
abrasive pad, scouring powder or solvent such 
as alcohol or benzene as it may mar the finish 
of the casing.
Wipe the disc cartridge with a dry cloth to 
remove dirt.
Dust on the lens may prevent the unit from 
operating properly. Be sure to close the disc 
compartment lid after inserting or ejecting a 
disc.
To obtain the best sound quality, use a dry 
cloth to wipe the plugs of the headphones/
earphones. Dirty plugs may cause sound 
distortion or intermittent breaks in the sound.