Sony 4-114-858-12(1) User Manual

E Shutter speed
F White balance

 appears during playback of the 

movie recorded with the shot transition 
or [MANU WB TEMP].

b

• The exposure correction value (0EV), shutter 

speed and iris will be displayed during viewing 
of still images on “Memory Stick Duo.”

• Date and time will be displayed in the same area 

when you select the date and time display. If 
you record without setting date and time, [-- -- 
----] and [--:--:--] will be displayed.

• An accurate shutter speed may not be displayed 

when you play back a tape recorded with your 
camcorder on another device. Check the data 
code that is displayed on the screen when you 
play back the tape on your camcorder for the 
accurate shutter speed.

You can check the settings of the following 
items.

• Audio setup such as microphone volume level 

(p. 42, 75)

• Output signal setup ([VCR HDV/DV], etc.) 

• Functions assigned to the ASSIGN buttons 

• Camera setup (p. 67)

• Optional external recording unit HVR-MRC1 or 

HVR-DR60

Press the STATUS CHECK button 
C.

Turn the SEL/PUSH EXEC dial D 
until a desired display shows up 
on the screen.

When the POWER switch B is set to 
CAMERA, the display changes in the 
following sequence:

AUDIO 

t OUTPUT t ASSIGN t 

CAMERA 

t EXT DEVICE (when an 

external device is connected)

When the POWER switch B is set to 
VCR, the display changes in the 
following sequence:

AUDIO 

t OUTPUT t ASSIGN t 

EXT DEVICE (when an external device 
is connected)

Press the STATUS CHECK button C.

Set the POWER switch B to OFF, then 
press the DISPLAY/BATT INFO button 
E. The approximate recordable time in the 
selected format and battery information 
appear for about 7 seconds. You can view 
the battery information for up to 20 seconds 
by pressing the button again while the 
information is displayed.

65

60

Remaining battery (approx.)

Recording capacity (approx.)