Sony HDW-M2000P User Manual

Chapter 9

Function Menu

Chapter 9

Function Menu

9-1

The function menu allows you to make frequently
made settings, such as selection of input video signals
and time code settings.

The function menu consists of six pages by factory
default: the HOME page and five pages numbered 1 to
5. You can also display the HOME2 page by setting
user-defined function keys. The following icons appear
at the left edge of the menu display section to denote
the current page.

: HOME page

: Page 1

: Page 2

: Page 3

: Page 4

: Page 5

: Page 6

: HOME 2 page

Each page has a menu display section made up of an
upper and lower part. The upper part displays the
menu items (functions) in the page, and the lower part
displays the menu item settings. The figure below
shows the menu display section in the HOME page.

In the figure above, SDI (HD Serial Digital Interface
signal) is selected as the setting for VID.IN (imput
video signal selection), the menu item for button F1.
This manual refers to this as “F1 (VID.IN) in function
menu HOME page is set to SDI.”

Settings (values)

Menu items (functions)

Up to six function keys can be defined (i.e. six
functions can be assigned to the F1 to F6 buttons in the
HOME2 page).
You can select and define the following function keys:
• Functions selected from the function menu items in

the HOME page and menu pages 1 to 4

• Function key to display the setting for setup menu

item 211 (REMOTE 1-PORT) and to carry out the
operation when the menu item setting is “panel”.

By factory default, no function keys are defined in the
HOME2 page.
It is not possible to display the HOME2 page unless
you have defined at least one function key in that page.

You can define up to six setup menu items (assign six
setup menu items to the F1 to F6 buttons) and register
them on page 6.

There is nothing defined on page 6 when the unit is
shipped from the factory.