Sony HT-DDWG800 User Manual

 

 

 

 

 

 

 

 

Clearing the receiver’s memory may remedy 
the problem (page 27). However, note that all 
memorized settings will be reset to their 
factory settings and you will have to readjust 
all settings on the receiver.

Consult your nearest Sony dealer. Note that if 
service personnel changes some parts during 
repair, these parts may be retained.

Power Output

1)

Models of area code CEL, CEK, AU
Stereo mode (rated) (6 ohms, 1 kHz, THD 1%)

90 W + 90 W

Surround mode (reference) (6 ohms, 1 kHz, THD 
10%)

RMS output

2)

FRONT:135 W

 

per channel
CENTER:135 W
SURROUND:135 W

 

per channel

1)

Measured under the following conditions:

2)

Reference power output for front, center and 
surround speakers. Depending on the sound field 
settings and the source, there may be no sound 
output.

Inputs

Analog

Sensitivity: 800 mV/

 

50 kohms

Digital 

(Coaxial)

Impedance: 75 ohms

Outputs (Analog)

AUDIO OUT

Voltage: 800 mV/

 

10 kohms

SUB WOOFER

Voltage: 2 V/1 kohm

Reproduction frequency range:

28 – 20,000 Hz

Tone

Gain levels

±6 dB, 1 dB step

All memorized settings

Customized sound fields

CEL, CEK

230 V AC, 50 Hz

AU

240 V AC, 50 Hz