Sony HT-DDW890 User Manual

Page of 80
65
GB
 
 
 
 
 
O
ther O
p
e
ra
tions
Using the Sleep Timer
You can set the receiver to turn off 
automatically at a specified time.
Press SLEEP repeatedly while the 
power is on.
Each time you press the button, the display 
changes cyclically as follows:
2-00-00 
1-30-00 
t 1-00-00 t 0-30-00 
t OFF
When sleep timer is activated, the display 
dims.
Note
If you press any buttons on the remote or receiver 
after the display dims, the display brightens up. 
After a while, the display dims again if no button is 
pressed.
Tip
To check the remaining time before the receiver 
turns off, press SLEEP. The remaining time appears 
on the display. If you press SLEEP again, the sleep 
timer will be canceled.
Recording using the 
receiver
You can record onto a CD-R using the 
receiver. See the operating instructions 
supplied with your CD recorder.
1
Press one of the input buttons 
to select the playback 
component.
You can also use INPUT SELECTOR on 
the receiver.
2
Prepare the playback 
component for playing.
For example, tune to the radio station you 
want to record (page 55).
3
Prepare the recording 
component.
Insert a blank CD-R into the CD recorder 
and adjust the recording level.
4
Start recording on the 
recording component, then 
start playback on the playback 
component.
Note
Sound adjustments do not affect the signal output 
from the SA-CD/CD/CD-R OUT jacks.
Recording onto a CD-R