Sony HT-SS2000 User Manual

GB

D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HT-
SF2000-CEL.fm

[HT-SF2000/HT-SS2000]

3-210-806-11

(1)

Place the speaker further away from the TV 
set.

Reposition the speakers or turn down the 
volume on the receiver.

Clean the cabinet, panel, and controls with a 
soft cloth slightly moistened with a mild 
detergent solution. Do not use any type of 
abrasive pad, scouring powder, or solvent, 
such as alcohol or benzine.

If you have any questions or problems 
concerning your receiver, please consult your 
nearest Sony dealer.

If you experience any of the following 
difficulties while using the receiver, use this 
troubleshooting guide to help you remedy the 
problem.

• Check that the speakers and components 

are connected securely.

• Check that both the receiver and all 

components are turned on.

• Check that MASTER VOLUME is not set 

to “VOL MIN”.

• Press MUTING to cancel the muting 

function.

• Check that you have selected the correct 

component with the input buttons on the 
remote or INPUT SELECTOR on the 
receiver.

• The protective device on the receiver has 

been activated. Turn off the receiver, 
eliminate the short-circuit problem, and 
turn on the power again.

• Check that the IN MODE setting is 

correct.

• Check that the component is connected 

correctly to the audio input jacks for that 
component.

• Check that the cord(s) used for the 

connection is (are) fully inserted into the 
jacks on both the receiver and the 
component.

• Check that you have selected the correct 

component with the input buttons on the 
remote or INPUT SELECTOR on the 
receiver.