Sony HTSS380 User Manual

Tune to the preset station you 
want to create an index name 
for (page 31).

V/v repeatedly until 

b.

V/v repeatedly until 

b.

The cursor flashes and you can select a 
character.

V/v to select a character, 

B/b to move the 

You can enter up to 8 characters to name 
the station.

• You can select the character type as follows 

by pressing 

V/v. 

Alphabet (upper case) 

t Numbers t 

Symbols

• To enter a blank space, press 

b without 

selecting a character.

If you enter a wrong character
Press 

B/b until the character to be 

changed flashes, then press 

V/v to select 

the desired character.

 The name you entered is registered. 

This receiver can create multi channel 
surround sound. You can select one of the 
optimized sound fields from the receiver’s 
pre-programmed sound fields.

You can also use SOUND FIELD on the 
receiver.

You can switch the output sound to 2 channel 
sound regardless of the recording formats of 
the software you are using, the playback 
equipment connected, or the sound field 
settings of the receiver.

x 2CH ST. (2 Channel Stereo)

The receiver outputs the sound from the front 
left/right speakers and the subwoofer only.
Standard 2 channel stereo sources completely 
bypass the sound field processing and multi 
channel surround formats are downmixed to 2 
channel except LFE signals.

The Auto Format Direct (A.F.D.) mode allows 
you to listen to high fidelity sound and select 
the decoding mode for listening to a 2 channel 
stereo sound as multi channel sound.

.

>

X

x

SOUND 
FIELD +/–