Sony HT-K25 User Manual

GB

You can adjust the balance and level of each
speaker. Sit in the listening position, then
adjust the test tone to sound the same level.
These settings are applied to all sound fields.

You will hear the test tone from each
speaker in sequence.

Front (left) t Center t Front (right) t
Surround (right) t Surround (left) t
Subwoofer

V/v/B/b

V/v/B/b

• To make more precise adjustment, start playing a

source encoded with multi channel surround effects
(DVD, etc.), then adjust the level and balance while
listening to the source.

• The system employs a test tone with a frequency

centered at 800 Hz.

• You can adjust the level of all speakers at the same

time. Turn MASTER VOLUME on the control
center or press MASTER VOL +/– on the remote.

• The front balance, surround balance, center level,

surround level, and subwoofer level are shown in
the display during adjustment.

• To enjoy the better sound quality, do not turn the

volume of the subwoofer too high.

By adjusting the surround and level parameters,
you can customize the sound fields to suit your
particular listening situation.

Position your speakers and do the procedures
described in “Placing speakers” (page 9) and
“Checking if the sound comes from all
speakers” (page 14) before you customize a
sound field.

This parameter lets you adjust the “presence”
of the current surround effect. This effect is
available for the sound fields except for AUTO
DECODING and NORMAL SURROUND.

Initial setting: (depends on sound field)

V/v/B/b