Sony HT-SF470 User Manual

V/v repeatedly until  

b.

V/v repeatedly until the 

• START: The S-AIR main unit starts 

pairing.

• CONDITION: You can check the 

current ID. When the pairing setting is 
timed out, “NO PAIRING” appears on 
the display.

x For the surround amplifier

Refer to the operating instructions 
supplied with surround amplifier.

x For the S-AIR receiver

Refer to the operating instructions 
supplied with S-AIR receiver.

“COMPLETE” appears on the display.

The AMP menu turns off.

Perform the pairing within several minutes after you 
select “START” in step 6. Otherwise, the pairing is 
canceled automatically and “INCOMPLETE” 
appears on the display.

Reset the ID of the S-AIR main unit. For 
details, see “To set the ID of the S-AIR sub 
unit” (page 50). You can set the same ID as 
before.

(For the S-AIR receiver only (not 
supplied))
You can enjoy the system’s sound in another 
room by using the S-AIR receiver. The S-AIR 
receiver can be placed in another room for 
enjoying the system’s sound there.
For details of the S-AIR receiver, refer to the 
operating instructions supplied with S-AIR 
receiver.

Sources with copyright protection may not be 
playable on S-AIR products.

• To set the ID of the S-AIR main unit, 

• To set the ID of the S-AIR receiver, 

refer to the operating instructions 
supplied with S-AIR receiver.

• When you are using another S-AIR sub unit, 

such as a surround amplifier, do not change 
the ID of the S-AIR main unit. Set the ID of 
the S-AIR receiver to match the ID of the 

 

S-AIR main unit.

• When you pair the S-AIR main unit and 

another S-AIR sub unit, such as a surround 
amplifier, you also need to pair the S-AIR 
main unit and the S-AIR receiver. For details, 
see “Pairing the S-AIR main unit with a 
specific S-AIR sub unit (Pairing operation)” 
(page 51).

O

AMP 
MENU

, 

 

V/v/B/b