Sony 4-130-033-13(1) User Manual

Depending on the connected component, the 
Control for HDMI function may not work. Refer to 
the operating instructions of the component.

To use the “BRAVIA” Sync, set the Control 
for HDMI function to on for both the receiver 
and the connected component. The receiver is 
compatible with the “Control for HDMI-Easy 
Setting” function.

When you connect a Sony TV with the 
“Control for HDMI-Easy Setting” function, 
the Control for HDMI function of the receiver 
can be turned on simultaneously by turning the 
Control for HDMI function of the TV on. 

Make sure that the receiver, TV, and 
playback components are connected 
using an HDMI cable (not supplied). 
(The respective components must be 
compatible with the Control for HDMI 
function.)

Turn on the receiver, TV and playback 
components.

Turn the Control for HDMI function of 
the TV on.
The Control for HDMI function of this 
receiver and all the connected components 
are simultaneously turned on. 
During setup, “SCANNING” appears in 
the display, and once setting is completed, 
“COMPLETE” will appear. Wait until the 
setup is complete.

For details on setting the TV, refer to the 
operating instructions supplied with the TV.