Sony HTD-710SS User Manual
masterpage:Left
lename[D:\Sony SEM
5\Revision_HTR210SS\J9050956_2599618112HTR210SS_GB\2599618112\GB06ADV_HTR-
10SS-CEL.fm]
10SS-CEL.fm]
28
GB
model name1[HTR-210SS]
[2-599-618-11(2)]
Using the SET UP menu to
adjust the receiver
adjust the receiver
You can adjust various receiver settings using
the SET UP menu.
the SET UP menu.
1
Press MAIN MENU repeatedly to select
“
“
SET UP
”.
2
Press
or
repeatedly to select the
parameter you want to adjust.
For details, see “SET UP menu parameters”
below.
below.
3
Press
or
repeatedly to select the
setting you want.
The setting is entered automatically.
4
SET UP menu parameters
The initial setting is underlined.
x
VD2-XXXX
(Audio input mode for VIDEO 2 input)
(Audio input mode for VIDEO 2 input)
Lets you select the audio input mode for VIDEO 2
input.
input.
• AUTO
Gives priority to digital signals when there are both
digital and analog connections. If there are no digital
signals, analog is selected.
digital and analog connections. If there are no digital
signals, analog is selected.
• OPT
Specifies the digital audio signals input to the
DIGITAL VIDEO 2 OPT IN jack.
DIGITAL VIDEO 2 OPT IN jack.
• ANLG
Specifies the analog audio signals input to the
VIDEO 2 AUDIO IN (L/R) jacks.
VIDEO 2 AUDIO IN (L/R) jacks.
x
CD-XXXX
(Audio input mode for SA-CD/CD input)
(Audio input mode for SA-CD/CD input)
Lets you select the audio input mode for SA-CD/CD
input.
input.
• AUTO
Gives priority to digital signals when there are both
digital and analog connections. If there are no digital
signals, analog is selected.
digital and analog connections. If there are no digital
signals, analog is selected.
• OPT
Specifies the digital audio signals input to the
DIGITAL SA-CD/CD OPT IN jack.
DIGITAL SA-CD/CD OPT IN jack.
• ANLG
Specifies the the analog audio signals input to the
SA-CD/CD AUDIO IN (L/R) jacks.
SA-CD/CD AUDIO IN (L/R) jacks.
x
A.V.SYNC. X
(Time alignment)
(Time alignment)
• Y (Yes) (Delay time: 68 ms)
The audio output is delayed so that the time gap
between the audio output and visual display is
minimized.
between the audio output and visual display is
minimized.
• N (No) (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projection TV.
• This parameter is valid when you use a sound field
selected with the 2CH or A.F.D. button except when
PCM 96 kHz signals are input.
PCM 96 kHz signals are input.
x
DUAL XXX
(Digital broadcast language selection)
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
during digital broadcast. This feature only functions
for Dolby Digital sources.
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
Mixed sound of both the main and sub languages will
be output.
be output.
Advanced settings
GB01COV_HTR-210SS-CEL.book Page 28 Wednesday, May 18, 2005 10:15 AM