Sony HVR-Z1E User Manual

Page of 136
Additional Information
118
1)When using mini DVCAM video equipment to 
perform DV dubbing of a tape recorded in DV 
format, the tape produced will be in the DVCAM 
format which the time code format will be partly 
misadjusted. (There will be no effect on the recorded 
picture except in certain cases.)
2)If the tape that is to be dubbed is in the DVCAM 
format as in 1), the tape produced will be in the 
DVCAM format and the time code format will be 
partly misadjusted.
3)Some mini DV video equipment may be able to play 
back a DVCAM-formatted tape. Even if the tape is 
played back, quality of the playback cannot be 
guaranteed. The time code format will be partly 
misadjusted.
b
Note
• If you use tapes as in 1) to 3) above for editing, the 
functions may be limited regardless of the format of 
players and recorders.
Limitations on editing
You may find the following limitations when 
editing a tape produced by dubbing or editing 
using the  HDV/DV jack:
• Due to the difference in track pitch, you 
cannot record or edit on DV-formatted tapes 
using mini DVCAM video equipment.
• Depending on the DVCAM video equipment 
used, you may not be able to edit DVCAM-
formatted tapes if the audio recording mode is 
unlock mode. In this case, dub using audio/
video jacks.
About the 
“InfoLITHIUM” 
battery pack
This unit is compatible with the 
“InfoLITHIUM” battery pack (L series). Your 
camcorder operates only with the 
“InfoLITHIUM” battery pack. 
“InfoLITHIUM” L series battery packs have the 
 mark.
What is the “InfoLITHIUM” battery 
pack?
The “InfoLITHIUM” battery pack is a lithium-
ion battery pack that has functions for 
communicating information related to operating 
conditions between your camcorder and AC 
Adaptor/charger.
The “InfoLITHIUM” battery pack calculates 
the power consumption according to the 
operating conditions of your camcorder, and 
displays the remaining battery time in minutes. 
With an AC Adaptor/charger, the remaining 
battery time and charging time appear.
To charge the battery pack
• Be sure to charge the battery pack before you 
start using your camcorder.
• We recommend charging the battery pack in 
an ambient temperature of between 10°C to 
30°C (50°F to 86°F) until the CHARGE lamp 
turns off. If you charge the battery pack 
outside of this temperature range, you may not 
be able to charge it efficiently.
• After charging is complete, remove the battery 
pack.
To use the battery pack effectively
• Battery pack performance decreases when the 
surrounding temperature is 10°C (50°F) or 
below, and the length of time you can use the 
battery pack becomes shorter. In that case, do 
one of the following to use the battery pack for 
a longer time.
– Put the battery pack in a pocket to warm it 
up, and insert it in your camcorder right 
before you start taking shots.
DV-
formatted 
DV
DVCAM
DV
DVCAM
1)
DV
DVCAM-
formatted
2)
DVCAM
DVCAM
DV
DVCAM
DV
DVCAM-
formatted
2)
DV
3)
DVCAM
DVCAM 
(Compati-
bility 
depends on 
models.)
DV
DV
Source 
tape
Player’s 
format
Re-
corder’s 
format
Record-
ing 
format