Sony HVR-M25E User Manual
Chapter 4
Dubbing to another equipment using i.LINK jack, Duplication, Audio Dubbing, and Connecting with a Computer
Chapter 4
Dubbing to another equipment using i.LINK jack, Duplication, Audio Dubbing, and Connecting with a Computer
59
Warning messages on duplication
If an error occurs during duplication, a STOP/
CAUTION number and warning message will be
displayed on LCD monitor and the video output screen.
CAUTION number and warning message will be
displayed on LCD monitor and the video output screen.
The following table lists these warnings and messages.
If a warning message is displayed, check this table and
take the appropriate action.
If a warning message is displayed, check this table and
take the appropriate action.
Note
When a warning message other than above is displayed, consult your Sony dealer.
STOP/
CAUTION
No.
Warning Message
Cause/Remedy
00
RECORDER:
INPUT SELECT is not set to
HDV/DV.
INPUT SELECT is not set to
HDV/DV.
INPUT SELECT switch on the recorder (the unit) is not set to HDV/DV.
t Set INPUT SELECT switch to HDV/DV.
t Set INPUT SELECT switch to HDV/DV.
01
i.LINK :
Cable not connected.
Cable not connected.
The i.LINK cable is not connected correctly.
t Connect the i.LINK cable correctly.
t Connect the i.LINK cable correctly.
02
i.LINK :
Check i.LINK connection.
Check i.LINK connection.
There are multiple i.LINK connections or the i.LINK connection is looped.
t You cannot connect multiple devices. Connect only one player to the unit.
t You cannot connect multiple devices. Connect only one player to the unit.
03
i.LINK :
Check i.LINK connection.
Check i.LINK connection.
The i.LINK cable has been unplugged and plugged in again.
t Check the i.LINK cable connection. Try to duplicate again.
t Check the i.LINK cable connection. Try to duplicate again.
10
PLAYER:
Recording.
Recording.
The player is in the recording mode.
11
PLAYER:
No cassette
No cassette
There is no cassette in the player.
12
PLAYER:
Cannot control.
Cannot control.
The player cannot be controlled.
13
PLAYER:
Cannot control.
Cannot control.
The player rejects control.
14
PLAYER:
Cannot control.
Cannot control.
The player is disabled or is in a different mode than the recorder (the unit) has
requested.
requested.
15
PLAYER:
Cannot control.
Cannot control.
The player is under an inappropriate condition.
16
PLAYER:
Cannot record due to
copyright protection.
Cannot record due to
copyright protection.
A copyright protected signal is recorded on the cassette in the player.
t You cannot duplicate copyright protected signals.
t You cannot duplicate copyright protected signals.
17
PLAYER:
Error detected.
Error detected.
The player has detected self-diagnostics.
18
PLAYER:
Moisture
Moisture
Moisture condensation has occurred in the player.
t Refer to the instruction manual of the player.
t Refer to the instruction manual of the player.
20
RECORDER:
No cassette inserted.
No cassette inserted.
There is no cassette in the recorder.
21
RECORDER:
The tape is locked.
–check the tab.
The tape is locked.
–check the tab.
REC/SAVE switch is set to SAVE switch on the cassette.
t Slide REC/SAVE switch to REC on the cassette.
t Slide REC/SAVE switch to REC on the cassette.
22
RECORDER:
Reinsert the cassette.
Reinsert the cassette.
The recorder (the unit) detected self-diagnostics.
t Insert a cassette again.
t Insert a cassette again.
23
RECORDER:
Re-attach the power source
Re-attach the power source
The recorder (the unit) detected self-diagnostics.
t Remove the power cord from the recorder.
t Remove the power cord from the recorder.
24
RECORDER:
Condensation. Cannot open.
Try later.
Condensation. Cannot open.
Try later.
Moisture condensation has occurred while the cassette is in the recorder (the
unit).
t Remove the cassette and power on and wait for more than one hour.
unit).
t Remove the cassette and power on and wait for more than one hour.
25
RECORDER:
Moisture condensation.
Turn off for 1H.
Moisture condensation.
Turn off for 1H.
Moisture condensation has occurred while the cassette is not in the recorder.
t Power on the recorder and wait for more than one hour.
t Power on the recorder and wait for more than one hour.
26
RECORDER:
Dirty video head.
Use a cleaning cassette.
Dirty video head.
Use a cleaning cassette.
The recorder’s (the unit) video heads are clogged.
t Clean the video heads with the supplied cleaning cassette (see page 90).
t Clean the video heads with the supplied cleaning cassette (see page 90).