Sony IZ1000W User Manual

x [YCbCr/RGB (HDMI)]

[Auto]: Automatically detects the type of 
external device, and switches to the matching 
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video 
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video 
signals.
[RGB]: Select this when connecting to a device 
with an HDCP-compliant DVI jack.

x [HDMI Deep Color Output]

[Auto]: Normally select this.
[12bit], [10bit]: Outputs 12bit/10bit video 
signals when the connected TV is compatible 
with Deep Color.
[Off]: Select this when the picture is unstable or 
colors appear unnatural.

x [Pause Mode] (BD/DVD VIDEO/DVD-R/
DVD-RW only)

[Auto]: The picture, including subjects that 
move dynamically, is output with no jitter. 
Normally select this position.
[Frame]: The picture, including subjects that do 
not move dynamically, is output in high 
resolution.

x [BD Audio MIX Setting]

[On]: Outputs the audio obtained by mixing the 
interactive audio and secondary audio to the 
primary audio.
[Off]: Outputs the primary audio only. Select 
this when outputting HD audio signals to an AV 
receiver.

x [Audio DRC]

You can compress the dynamic range of the 
sound track.

[Auto]: Performs playback at the dynamic range 
specified by the disc (BD-ROM only).
[Off]: No compression of dynamic range.

[On]: The system reproduces the sound track 
with the kind of dynamic range that the 
recording engineer intended.

x [Attenuate - AUDIO]

Distortion may occur when you listen to a 
component connected to the AUDIO (AUDIO 
IN L/R) jacks. You can prevent distortion by 
reducing the input level on the unit.

[On]: Attenuates the input level. The output 
level is changed.
[Off]: Normal input level.

x [Audio Output]

The system cannot output multi-channel sound 
from both the HDMI (OUT) jack and system’s 
speakers simultaneously.

[Speaker]: Outputs multi-channel sound from 
the system’s speakers only.
[Speaker + HDMI]: Outputs multi-channel 
sound from the system’s speakers and 2-channel 
linear PCM signals from the HDMI (OUT) jack.
[HDMI]: Outputs multi-channel sound from the 
HDMI (OUT) jack only. Sound format depends 
on the connected component.

• Even if [HDMI] or [Speaker + HDMI] is selected, the 

sound of functions other than “BD/DVD,” “D. 
MEDIA,” “HDMI1,” or “HDMI2” is output from the 
system’s speakers, not from the HDMI (OUT) jack.

• When you set [Audio Output] to [HDMI], the 

SOUND MODE, “TONE,” “NIGHT MODE,” and 
“SUR.SETTING” functions are disabled.

• When the System Audio Control function (page 51) 

is activated, this setting may change automatically.

x [Sound Effect]

You can set the system’s sound effects (SOUND 
MODE, “TONE,” “NIGHT MODE,” and 
“SUR.SETTING”

) 

to on/off.

[On]: Enables all of the system’s sound effects. 
The upper limit of sampling frequency is set to 
48 kHz. 
[Off]: The sound effects are disabled. Select this 
when you do not want to set the upper limit of 
sampling frequency.