Sony kdl-32s2030 User Manual

 GB

Switch on the connected equipment, then 
perform one of the following operation.

For equipment connected to the scart sockets using a 
fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears on 
the screen.

For an auto-tuned VCR (page 6)
In analogue mode, press PROG +/-, or the number 
buttons, to select the video channel. 

For other connected equipment
Press 

/

 repeatedly until the correct input 

symbol (see below) appears on the screen.

Press TOOLS to display the following options when 
viewing pictures from connected equipment other 
than PC.

AV1/

AV1, AV2/

AV2: 

Audio/video or RGB input signal through the scart 
socket 

/

1 or 2. 

 appears only if an RGB 

source has been connected.

AV3: 

Component input signal through the Y, P

B

/C

B

, P

R

/C

R

 

sockets 

/

3, and audio input signal through the 

L, R sockets 

/

3.

AV4: 

Digital audio/video signal is input through the HDMI IN 
4 socket. Audio input signal is analogue only if the 
equipment has been connected using the DVI and audio 
out socket.

AV5/

AV5: 

Video input signal through the video socket 

5, and 

audio input signal through the L (MONO), R audio 
sockets 

5. 

 appears only if the equipment is 

connected to the S video socket 

5 instead of the 

video socket 

5, and S video input signal is input 

through the S video socket 

5.

Return to the normal 
TV operation

Press DIGITAL or ANALOG. 

Access the Input 
signal index table

Press 

 to access the Input signal 

index table. (Then, only in 
analogue mode, press 

g

.) To 

select an input source, press 

F

/

f

, 

then press 

. 

Power Saving

See page 27.

Picture Mode

See page 21.

Sound Mode

See page 23.

Auto Clock Set (in 
analogue mode only)

Allows you to switch to digital 
mode and obtain the time.

Sleep Timer

See page 26.

i

 Volume

See page 24.