Sony ipela nsr series User Manual

Page of 186
36
Chapter 2  Initial Configuring the System
Reconstructing Data Volume (Changing RAID Types) 
(Only the NSR-100/50)
RAID constructions that can be set as data volumes differ depending on the 
model number of the NSR.
* RAID is not available for the NSR-25.
Caution
• Be aware that all settings information and recorded images are deleted when 
reconstructing data volume.
• When changing the settings is necessary, make sure to change the RAID 
construction beforehand.
1
Connect the USB keyboard and USB mouse to the NSR, and turn on the 
power.
The following screen and a progress bar for hardware startup appear.
2
Press F12 on the keyboard while the progress bar is displayed.
The screen similar to the following appears.
Example: For the NSR-50 (there are 3 menu items for the NSR-100)
* The number of devices and their names may differ from the following example 
screen.
Model
Type
Approximate 
capacity
Redund-
ancy
Default 
setting
NSR-100 RAID-5
670 GB
Yes
Yes
RAID-1+0
450 GB
Yes
RAID-0
900 GB
None
NSR-50
Spanning
430 GB
Partial
Yes
RAID-1
210 GB
Yes
Boot Menu
1.QSI DVD+/–RW SDW-0826
2. WDC WD2500JD-22HBC0-(S1)
3. WDC WD2500JD-22HBC0-(S2)
4. PQI IDE DiskOnModule-(SM)
<Enter Setup>