Sony KDL-40S20L1 User Manual

This TV can be installed on a wall by using a wall-mount bracket (sold 
separately). Before mounting the TV on a wall, the Table-Top Stand must be 
removed from the TV.

Follow the simple steps below to remove the Table-Top Stand:

Disconnect all the cables from the TV.

Cover a level and stable surface with a thick and soft cloth.

Gently lay the TV, face down, onto the cloth.  Make sure the Table-Top 
Stand is hanging over the edge.

Rotate the cable holder 90 degrees, and pull it out completely. [See 
illustration A]

Remove the screws and detach the Table-Top Stand from the TV. [See 
illustration B] Be sure to hold the Table-Top Stand firmly while 
removing the last screw.

Do not remove any other screws from the TV.

For bracket installation, refer to the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise is required in 
installing this TV, especially to determine the strength of the wall for 
withstanding the TV’s weight. For product protection and safety reasons, 
Sony strongly recommends that you use the Wall-Mount Bracket model 
designed for your TV and the wall-mounting of your TV should be 
performed by Sony dealers or licensed contractors.

Do not remove the Table-Top Stand for any reason other than to wall-
mount the TV.

Be sure to store the removed screws and Table-Top Stand in a safe 
place until you are ready to reattach the Table-Top Stand.  Keep the 
screws away from small children.

(KDL-32S20L1)