Sony kdf-55-60 xs955 User Manual

Page of 2
Replacing the Lamp
If the screen becomes dark, the color looks unusual, or the LAMP
indicator on the front of the LCD projection TV flashes, it is time
to replace the lamp with a new one (not supplied).
Use a Sony XL-2100U or XL-2100 (for WE655 series) or XL-2200 (for WF655 series)
replacement lamp (not supplied) for replacement. Use of any other lamp may damage the
LCD projection TV.
Before replacing the lamp, turn the power off on the main unit. Wait several minutes,
then unplug the power cord. (The cooling fan will continue to blow for about two
minutes after turning the power off.)
Allow the lamp to cool down completely before removing it. The surface of the lamp
remains extremely hot for at least 30 minutes after the power has been turned off.
Sony XL-2100U or XL-2100 for KDF-WE655 series
1
Loosen the screws on the rear
side panel.
*The illustration described in right is for
KDF-50WE655.
2
Remove the front panel.
3
Loosen the screw with a coin or
similar object to remove the lamp cover.
4
Loosen the two screws that hold
the lamp, then pull out the lamp.
5
Replace the new lamp and tighten the screws.
6
Reattach the lamp cover and tighten the screw.
7
Reattach the front panel securely.
8
Tightly screw the side panel in its place.
Sony XL-2200 for KDF-WF655 series/KDF-XS955 series
1
Loosen the screws on the rear
side panel. (only for WF655)
2
Remove the front panel.
3
Loosen the screw, release the bar (for WF655) or slide the knob
to left (for XS955), and remove the lamp cover.
4
Loosen the screw that secure the lamp, then pull out the lamp.
5
Replace the new lamp and tighten the screw.
6
Reattach the lamp cover and tighten the screw.
7
Reattach the front panel securely.
8
Tightly screw the side panel in its place. (only for WF655)
STD/DUO
POWER
PRO
Additional Connections
For best audio performance, connect your digital audio components
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you’ll need to connect the satellite antenna. If you
have an A/V receiver, you’ll need to connect speakers.
The connection diagrams shown in the reverse side are recommendations only; other
possible solutions may exist. Connections that include an A/V receiver can often be
very complex, so check your A/V receiver’s instruction manual for additional details.
Activating CableCARD™ Service
Before you can use CableCARD service,
you need to insert the CableCARD
(supplied by your cable provider) and
activate the service, as described in right.
Inserting the CableCARD incorrectly may result in permanent damage to the card and
the TV.
POWER
TV/
VIDEO
DISPLAY
ENT
TV
F1
F2
MENU
GUIDE
TOP MENU
FAVORITES
FREEZE
RESET
SLEEP MTS/SAP JUMP
ANT
GUIDE
CH
VOL
SAT/
CABLE
FUNCTION
DVD/VCR
MUTING
DVD/
VCR
MODE
SAT/
CABLE
PICTURE
WIDE
TV
/TV/SAT
Connector type
HDMI
(High-Definition
Multimedia Interface)
Component video
S VIDEO
Composite video
RF/Coaxial
Making Video Connections
Best Video
Performance
• See the “Cables Required” chart that appears with the diagram to
determine which cables you’ll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you’ll need a special bi-
directional splitter that’s compatible with your cable box. Contact
your cable provider for details.
For these components
See reverse side
 or
 or
 or
 or
• Review the following chart to determine which diagram to use to
connect the components in your system:
KDF-42/50 WE655
KDF-55/60 WF655
KDF-55/60 XS955
Sony Corporation © 2004   Printed in U.S.A.
2-059-371-12(1)
Quick Setup Guide
Checking the
Supplied Accessories
Programming
the Remote Control
Connecting Your TV
(See reverse side)
Running Initial Setup
Do not throw away this guide, and keep it handy for future reference.
For further information, see the operating instructions supplied with the TV.
Please follow the steps to setup your TV:
1
Running Initial Setup
2
Programming the Remote Control
zzz
Along with your new LCD projection TV, the packing box contains a
remote control and two AA (R6) batteries. These items are all you
need to set up and use the TV.
1
Press POWER to turn on the TV.
The Initial Setup screen appears.
2
Press 
V/v to select the on-screen display language. Then press
.
The message “Start auto program now?” appears.
3
Press 
V/v to select “Yes”, then press 
 only.
Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
If you need to perform Auto Program again
1
Press MENU.
2
Press 
V/v to select 
 (Channel), then press 
.
3
Press 
V/v to select “Auto Program,” then press 
.
4
Press 
.
“Auto Program” appears and the TV starts scanning and
presetting channels automatically. When all the receivable
channels are stored, the “Show/Hide Channels” menu appears.
Using this menu, you can start skipping unwanted channels (see
“Selecting Channel Options” in the operating instructions).
5
Press MENU to exit the menu screen.
Auto Program may take up to 50 minutes to complete. A progress bar will display the
approximate progress of the Auto Program and Digital Channels/Add sequences.
The remote control is preset to operate Sony brand video equipment.
Sony Equipment
Programmable Code Number
DVD/VCR
601 (Sony Dream System)
SAT/Cable
801 (Sony Satellite Receiver)
If you have video equipment other than Sony brand that you want to
control with the LCD projection TV’s remote control, use the
following procedures to program the remote control.
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
Manufacturer’s codes
DVD Players
Manufacturer
Code
Sony
751
General Electric
755
Hitachi
758
JVC
756
Magnavox
757
Mitsubishi
761
Panasonic
753
Philips
757
Pioneer
752
RCA/PROSCAN
755
Samsung
758
Toshiba
754
Zenith
760
DVD Changers
Manufacturer
Code
Sony
765
Panasonic
766
DVD/VCR Combo Units
Manufacturer
Code
Sony
767
Broksonic
776
JVC
775
Panasonic
777
Samsung
774
Toshiba
773
Zenith
768
HDD/DVD Combo Units
Manufacturer
Code
Sony
770, 771, 772
5.1ch DVD AV System
Manufacturer
Code
Sony (DAV)
601, 602, 603, 604
AV Receivers
Manufacturer
Code
Sony
764
VCRs
Manufacturer
Code
Sony
301, 302, 303
Admiral (M. Ward)
327
Aiwa*
338, 344
Audio Dynamic
314, 337
Manufacturer
Code
Broksonic
319, 317
Canon
309, 308
Citizen
332
Craig
302, 332
Curtis Mathes
304, 338, 309
Daewoo
341, 312, 309
DBX
314, 336, 337
Dimensia
304
Emerson
319, 320, 316, 317,
318, 341
Fisher
330, 335
Funai
338
General Electric
329, 304, 309
Go Video
322, 339, 340
Goldstar
332
Hitachi
306, 304, 305, 338
Instant Replay
309, 308
JC Penney
309, 305, 304, 330,
314, 336, 337
JVC
314, 336, 337, 345,
346, 347
Kenwood
314, 336, 332, 337
LG
332
LXI (SEARS)
332, 305, 330, 335,
338
Magnavox
308, 309, 310
Marantz
314, 336, 337
Marta
332
Memorex
309, 335
Minolta
305, 304
Mitsubishi/MGA
323, 324, 325, 326
Multitech
325, 338, 321
NEC
314, 336, 337
Olympic
309, 308
Optimus
327
Orion
317
Panasonic
308, 309, 306, 307
Pentax
305, 304
Philco
308, 309
Philips
308, 309, 310
Pioneer
308
Quasar
308, 309, 306
RCA/PROSCAN
304, 305, 308, 309,
311, 312, 313, 310,
329
Realistic
309, 330, 328, 335,
324, 338
Sansui
314
Samsung
322, 313, 321
Sanyo
330, 335
Scott
312, 313, 321, 335,
323, 324, 325, 326
Sharp
327, 328
Signature 2000 (M.Ward) 338, 327
SV 2000
338
1
Press the DVD/VCR (FUNCTION) and RESET
buttons simultaneously, or press the SAT/CABLE
(FUNCTION) and RESET buttons simultaneously.
DVD/VCR and SAT/CABLE buttons flash.
2
Press the function button you want to program.
To program a cable box or a satellite receiver
Press SAT/CABLE (FUNCTION).
To program video equipment
Press DVD/VCR (FUNCTION).
3
Enter the three-digit manufacturer’s code number
using the 0-9 buttons.
4
Press ENT (enter).
5
To check if the code number works, aim the TV’s
remote control at the equipment and press DVD/
VCR and/or SAT/CABLE (POWER) that corre-
sponds with that equipment. If it responds, the
programming is completed. If not, try using the
other codes listed for that manufacturer.
5
3
4
1, 2
1
If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our Customer Information Service Center (Toll Free):
1-800-222-SONY (7669) for US residents.
1-877-899-SONY (7669) for Canadian residents.
A
B
C
D
E
F
2
1
3
4
zzz
zzz
Checking the
Supplied Accessories
Connecting Your TV
Your TV includes
several types of video
inputs. Use the inputs
that are available on
your components that
provide the best video
performance, as
described in right.
VIDEO IN
VHF/UHF
CABLE
S VIDEO
VIDEO
AUDIO
Y
PB
P
L
IN
OUT
R
L(MONO)
R
1
AUDIO
L
R
3
4
HD/DVD IN
(1080i/720p/
480p/480i)
5
6
AUDIO
OUT
(VAR/FIX)
R
7
L
AUDIO IN
R
AUDIO
PCM/DOLBY DIGITAL
OUT
DIGITAL
AUDIO
(OPTICAL)
CableCARD
CONTROL S
3
4
Manufacturer
Code
Sylvania
308, 309, 338, 310
Symphonic
338
Tashiro
332
Tatung
314, 336, 337
Teac
314, 336, 338, 337
Technics
309, 308
Toshiba
312, 311
Wards
327, 328, 335, 331,
332
Yamaha
314, 330, 336, 337
Zenith
331
Cable Boxes
Manufacturer
Code
Sony
230
Hamlin/Regal
222, 223, 224, 225,
226
Jerrold/G.I./Motorola 201, 202, 203, 204,
205, 206, 207, 208,
218, 222
Oak
227, 228, 229
Panasonic
219, 220, 221
Pioneer
214, 215
Scientific Atlanta
209, 210, 211
Tocom
216, 217
Zenith
212, 213
Satellite Receivers
Manufacturer
Code
Sony
801
Dish Network
810
Echostar
810
General Electric
802
Hitachi
805
Hughes
804
Mitsubishi
809
Panasonic
803
RCA/PROSCAN
802, 808
Toshiba
806, 807
* If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.
WF655
XS955
WF655
XS955
WF655
XS955
If more than one code number is listed, try entering them one by one until you come to
the correct code for your equipment.
If you enter a new code number, the code number you previously entered at that setting
is erased.
In some cases, you may not be able to operate your equipment with the supplied
remote control. In such cases, use the equipment’s own remote control unit.