Sony kdl-60nx810 User Manual

Some TV models are packaged with a 
detached Table-Top Stand so you can mount 
your TV to a wall right away. If you are not 
mounting the TV to a wall, you will need to 
attach the Table-Top Stand. You will need a 
Phillips screwdriver and the supplied screws 
to complete the task. Look for the attachment 
instructions provided with the TV. 
Be sure to consider the following while 
setting up your TV: 
•

Disconnect all cables when carrying the 
TV. 

•

Carry the TV with the adequate number 
of people; larger size TVs require two or 
more people. 

•

Correct hand placement while carrying 
the TV is very important for safety and 
to avoid damage. 

•

Ensure your TV has adequate 
ventilation, see page 16.

•

For best picture quality, do not expose the 
screen to direct illumination or sunlight.

•

Avoid installing the TV in a room with 
reflective wall and floor materials. 

•

If the TV is brought directly from a cold 
to a warm location, or is placed in a very 
damp room, or is placed in a room in 
which heating has just been turned on, 
moisture may condense on the surface or 
inside the TV. Should this occur, turn off 
the TV and leave the TV off until the 
moisture evaporates, and then the TV 
can be used. If you notice moisture 
condensation between the glass panel 
and the LCD, turn on the TV and the 
condensation will evaporate after the TV 
has warmed up.

Refer to the supplied Table-Top Stand 
instruction leaflet for proper attachment for 
some TV models.

~

• Do not put stress on the LCD panel or the 

frame around the screen.

• Be careful to not pinch your hands or the AC 

power cord when you install the TV unit to the 
Table-Top Stand.

Gently slide the TV unit onto the 
Table-Top Stand and align the screw 
holes.

Use the supplied screws to attach the 
TV unit to the Table-Top Stand. 

~

• If you use an electric screwdriver, set the 

tightening torque at approximately 1.5 N·m 
{15 kgf·cm}.