Sony KDL-32XBR6 User Manual

Sony strongly recommends taking 
measures to prevent the TV from toppling 
over. Unsecured TVs may topple and 
result in property damage, serious bodily 
injury or even death.

Prevent the TV from Toppling Over
s

Secure the TV to a wall and/or stand.

s

Do not allow children to play or climb on 
furniture and TV sets.

s

Avoid placing or hanging items on the TV.

s

Never install the TV on:

• slippery, unstable and/or uneven surfaces.
• furniture that can easily be used as steps, 

such as a chest of drawers.

s

Install the TV where it cannot be pulled, 
pushed, or knocked over.

s

Route all AC power cords and connecting 
cables so that they are not accessible to 
curious children.

Use a Sony specified TV stand (see page 2) and 
follow the instruction manual provided with the 
Sony TV stand.

If a Sony specified TV stand is not used, consider 
the following recommended measures.

Secure the Stand for the TV
Make sure the TV stand can adequately support 
the weight of the TV. Use two angle braces (not 
supplied) to secure the stand.
For each angle brace use the appropriate hardware 
to:

• attach one side of the angle brace to the wall stud.
• attach the other side to the TV stand.

Use the optional hardware listed below (not 
supplied):

• M6 × 12-18 mm anchor bolt (screwed into the 

TV’s Table-Top Stand)

• A screw or similar (attach it to the TV stand)

• Rope or chain (strong enough to support the 

weight of the TV). Make sure that there is no 
excess slack in the rope or chain.

An alternative way to secure the TV is with an 
optional Sony Support Belt Kit.

~

Contact Sony Customer Support to obtain the optional 
Support Belt Kit by providing your TV model name.
• For United States call: 1-800-488-7669 or visit: 

www.sony.com/accessories

• For Canada call: 1-877-899-7669

Anchor the TV to the Wall
Use the hardware listed below (not supplied):

• Two  M6  × 12-18 mm anchor bolts (screw into 

the top-most wall-mount holes located on the 
rear of the TV)

• Rope or chain (attach to one M6 anchor bolt)
• Wall-anchor (attach to the wall stud) strong 

enough to support the weight of the TV (pass 
the rope through the wall-anchor, then attach 
to the other M6 anchor bolt)

~

• Securing the TV to the stand without securing it and 

the stand to the wall provides minimum protection 
against the TV toppling over. For further protection, 
follow all three measures recommended above.

Stand

Angle brace

Anchor 
bolt

Screw

Screw hole on the 
Table-Top Stand

Rope or 
chain

Anchor bolts

Wall-mount 
holes

Wall- 
anchor