Sony kdl-32v45xx User Manual

 GB

Switch on the connected equipment, then 
perform one of the following operation.

For equipment connected to the scart sockets using 
a fully-wired 21-pin scart lead 
Start playback on the connected equipment.
The picture from the connected equipment appears 
on the screen.

For an auto-tuned VCR/ DVD recorder 
In analogue mode, press PROG +/-, or the number 
buttons, to select the video channel. 

For other connected equipment 
Press 

/

 to display a list of connected 

equipment.  Press 

F

/

f

 to select the desired input 

source, then press 

.

The highlighted item is automatically selected if you 
do not perform any operation for two seconds after 
pressing

  .

If you have set an input source to "Skip" in the "AV 
Preset" menu (page 26), that input source does not 
appear in the list.

z

To return to normal TV mode, press DIGITAL or 
ANALOG.

AV1

To see the equipment connected to 
A.

AV2

To see the equipment connected to 
B.

~

SmartLink is a direct link between 
the TV and a VCR/DVD recorder.

AV3

To see the equipment connected to 
L.

HDMI 1*

To see the equipment connected to 
D.

HDMI 2*

To see the equipment connected to 
E.
If the equipment has a DVI socket, 
connect the DVI socket to the 
HDMI IN socket through a DVI-
HDMI adaptor interface (not 
supplied), and connect the 
equipment’s audio out socket to the 
audio in HDMI IN socket.

HDMI 3*

To see the equipment connected to 
K.

*  ~
• Be sure to use only an authorized HDMI cable bearing 

the HDMI logo. We recommend that you use a Sony 

HDMI cable (high speed type). 

• When “Control for HDMI” compatible equipment is 

connected, communication with the connected 
equipment is supported. Refer to page 19 to set up this 
communication.

• When connecting an audio system with HDMI socket, 

be sure to also connect to the HiFi socket.

 Component

To see the equipment connected to 
C.

PC                       

To see the equipment connected to 
H.

z

It is recommended to use a PC 
cable with ferrites, such as the 
"Connector, D-sub 15"  (ref. 1-
793-504-11, available in Sony 
Service Centre) or equivalent.

Headphones M Connect to the i socket to listen to 

sound from the TV on headphones.

Conditional 
Access Module 
(CAM) I

Provides access to pay TV services. 
For details, refer to the instruction 
manual supplied with your CAM.
To use the CAM, remove the 
“dummy” card from the CAM slot, 
then turn off the TV and insert your 
CAM card into the slot. When you 
are not using the CAM, we 
recommend that you keep the 
“dummy” card in the CAM slot.

~
CAM is not supported in all countries. 
Please check with your authorized 
dealer.

Hi-Fi audio 
equipment G

Connect to the audio output sockets 

 to listen to the sound from the 

TV on Hi-Fi audio equipment.

DIGITAL 
AUDIO OUT 
(OPTICAL) F

Use an optical audio cable.

USB J

Use USB memory to display photos.

Return to normal TV 
mode

Press DIGITAL or ANALOG. 

010COV.book  Page 18  Tuesday, June 17, 2008  12:53 PM