Sony klv-v26a10 User Manual

KLV-V40A10

2-682-277-11(1)

 GB

Setting “1Digit Direct” to “On”, you can switch the channel to the one assigned to a number 
button as soon as you press the button. To enjoy the benefit of this feature, assign the 
channels you frequently watch to the program positions which are equivalent to the number 
buttons using “Program Sorting” (page 42).

Press 

M/m to select “On”, then press 

.

If there are many two-digit channels and you select them using the number buttons, select “Off”.

Assigns a channel name of your choice up to five letters or numbers. The name will be 
displayed briefly on the screen when the channel is selected.

Press 

M/m to select the channel you want to name.

Press 

</, to select the position to input a character, M/m to select the 

desired letter or number.

Repeat the procedure in step 2 until the name is complete, then press  

.

Blocks an individual channel from being watched.

Press 

M/m to select the channel you want to block, then press 

.

Press 

M/m to select “Block”, then press 

.

To watch the channel, select “Allow”.

Skips unused channels when you press PROG +/- to select 
channels. (You can still select a skipped channel using the number 
buttons.)

Press 

M/m to select “On”, then press 

.

To restore a skipped channel, select “Off”.

Adjusts the TV reception sensitivity if the TV signal is too strong 
and the picture is distorted.

Press 

m to select “Low”, then press 

.

Tunes in a channel manually.

Press 

</, until the desired channel’s broadcast 

appears on the TV screen, then press 

.

The frequency range indication (VHF Low, VHF High, or UHF) 
switches automatically as you keep pressing 

</,.

If the TV reception is not satisfactory, adjust the above options.

010COV.book  Page 41  Tuesday, May 23, 2006  9:06 AM