Sony kv-29fq85e User Manual

Navegador

Configuración del Sistema

Aceptar

Versión

PROG+ PROG-

Select:

Select:

Move Frame

03

 Press 

 to display PAP. 

 

One of the screens will be framed to indicate that this is 

the active screen. It means that when you want to select 
the PAP source, you will be doing it in the active screen.

 Press 

 again to remove PAP.

On the screen appears a banner guiding you how to operate 

PAP. This banner will disappear after some seconds but it 
always can be displayed again by pressing the 

 button.

This is only possible if Media Selector is set to TV.

To change the active screen (framed), press the 

B

 or 

b

 buttons. 

Selecting a TV channel:
Press the 

B

 button to select the left screen as the active screen. Next press the number buttons 

or PROG +/- to select a TV channel.

 Video input signals can not be displayed on the left screen.

  Selecting an input source:

Press the 

b

 button to select the right screen as the active screen. Next press repeatedly the 

 

button to watch the input signal of a connected equipment onto the TV right screen. For more 
details on which input symbol you want to choose, please see section "Viewing pictures from 
equipment connected to the TV" on page 23.

    

RF signal (TV broadcast channels) can not be displayed on the right screen.

Selecting the sound
The sound of the active screen (framed) always comes from the TV set loudspeakers.
Besides that, you can listen to the active screen as well as the non active screen via headphones.

To do this:
With the PAP switched on, refer to the section "The Sound Adjustment Menu", select "Headphones 
Set Up" and set the option "

 PAP Sound" according your preference. For details see page 15.

In PAP (picture and picture) mode, the output from the Scart 

2/

2 is fixed to the right 

picture.

PAP divides the screen into two to watch two pictures in format 4:3 simultaneously.