Sony kv-28ds60u-28ds65u User Manual

Push in the on/off switch on the front of the TV.

Connect the TV plug to the mains socket
(220-240V AC, 50Hz) and switch on.

You can tune the TV to receive the new digital channels and/or the traditional analogue channels. If at any time during this procedure  you want
to return to the normal TV picture, press the MENU button.

Press the MENU button on the remote control to display
the menu on the TV screen.

Move the OK button on the remote control DOWN to
select the 

 symbol on the menu screen then move

RIGHT to enter the ‘PRESET’ menu.

Move the OK button DOWN to select “Programme
Setup” then move RIGHT to enter the ‘PROGRAMME
SETUP’ menu.

Move the OK button RIGHT to highlight the brackets
then move repeatedly DOWN to select ‘Digital’ if you
wish to view digital channels or ‘Analogue’ if you wish
to view analogue channels.

Press the OK button to confirm then move LEFT to
display the PRESET menu.

Move the OK button UP to select ‘Auto Programme’
then move the OK button RIGHT to display the
“AUTO PROGRAMME” menu.

Press the OK button to start the automatic tuning
process.  The word ‘searching’ now flashes on the menu
screen and the TV starts to store all available channels.
When tuning digital channels, please be patient and do
not press any buttons as the tuning process takes
approximately twenty minutes depending on the number
of channels.

When the autotune procedure is complete, the PRESET
menu appears on the screen and the channel currently
being broadcast on programme 1 is displayed.

If you wish to tune in both the digital channels and the
analogue channels, repeat steps 3-8, remembering to
change your selection in step 4.

10 Press the MENU button to remove the ‘PRESET’ menu

from the TV screen.

11 Press the PROGR+/- or the numbered buttons on the

remote control to view the channels.

• If you wish to stop the “autotune” procedure,

press the OK button then the MENU button on
the remote control.

• If, after tuning is complete, no digital

programme is displayed on the TV, repeat steps
1-11 but select ‘Analogue’ in the Programme
Setup menu screen.  When digital programmes
become available in your area, repeat steps 1-11
above and select ‘Digital’ in the Programme
Setup menu screen.

• If you wish to rearrange the order of the

channels, please refer to the “Exchanging
Programme Positions’ section of the main
instruction manual.