Sony KV-32FX65U User Manual

Page of 2
Thank you for purchasing this Sony product.
After following this step by step guide you 
will be able to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) 
to your TV.
Tune your TV.
View TV programmes.
1
KV-28FX65U
KV-32FX65U
Quick Start Guide
Checking the 
accessories supplied
Connecting the TV
3
Always observe the correct polarity when inserting batteries.
Always remember to dispose of used batteries in an environmentally friendly way.
Batteries
R
4-205-798-03
Inserting batteries into 
the remote control
Connecting an aerial to your TV
Connect your existing aerial lead to the socket marked 
 on the rear of the TV set.
Connecting an aerial and VCR to your TV
1. Connect your existing aerial lead to your VCR as shown. 
2. Connect the VCR aerial lead from the RF OUT socket on the back of the VCR to the 
aerial socket on the back of the TV as shown.
3. Connect the scart lead (if used) to the AV2 socket on the rear of the TV set.
4. Connect the VCR set to the mains and switch on.
5. Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables the 
TV set to locate and store the video channel during the ‘Automatically Tuning the TV’ 
section of this Quickstart Guide.
Remote Control
If you are not 
connecting your TV 
to a VCR, please 
connect the aerial 
lead (as shown left) 
and proceed to 
section ‘4.Switching 
on the TV’.
If you are connecting 
your TV to a VCR 
please refer to the 
section below.
The scart lead is 
optional.  If it can be 
used however, this 
additional 
connection can 
improve picture and 
sound quality when 
in play mode.
2
OUT
IN
AERIAL
ANTENNA
AC IN