Sony kv-32ds60u User Manual

No picture, no sound.

• Power off.
• TV in  standby.
• Aerial disconnected.

Poor or no picture (screen is dark), but good sound. • Picture preset level adjustment.
No picture on any channel after digital tuning.

• No digital transmissions in your area.
• No digital transmissions from the transmitter you are

currently using.

• Weak signal.
• Unsuitable aerial.

Some channels are blank.

• Scrambled/subscription-only channel.
• Programme used only for data (no picture or sound).
• Programme not being transmitted.

Standby indicator flashing.

• Digital mode Timer Record active (regular flash).
• Fault (irregular flash).

Good picture, no sound.

• Volume control.

Poor picture quality.

• Wrong external mode selected on an RGB video source.

No colour on colour programmes.

• Colour level setting.

Remote contol does not function.

• Batteries low.

Distorted picture when changing programmes or

• Inputs from external equipment not switched off.

selecting Teletext.

Power off.

• Plug in the TV.

TV in Standby.

• Press the   button on the front of the TV.
• If the 

 indicator is on, press the 

/

  button or a

programme number on the remote control.

Aerial disconnected.

• Check the aerial connection.

Picture level adjustment.

• Select  

 on the TV menu system then adjust the

brightness, picture and colour balance levels.

• Lift the flap of the remote control and press 

  to

return to the preset factory levels.

No digital transmissions in your area.

• Switch the TV to analogue mode using the

‘Automatically tuning the TV’ section of this instruction
manual then contact a local installer to find out when
digital transmissions start in your area.

No digital transmissions from the

• Contact a local installer to find out which

transmitter you are currently using

transmitter you should be pointing your aerial at.

Unsuitable aerial.

• Change your aerial to cover the channels used by digital

programmes (Contact a local installer).

Weak signal.

• Ensure aerial is plugged directly into the TV (not

through other equipment).

• Ensure aerial is correctly aligned to transmitter.
• Upgrade to a higher gain aerial.

Scrambled/subscription-only channel.

• Subscribe to pay-per-view broadcaster.

Programme information without picture or sound.

• See “Skipping programme position” section.
• See “Exchanging programme positions” section.

Fault.

• Do not open the cabinet, refer to qualified person.
• Contact your nearest Sony Service Centre.

Volume control.

• Press the 

 +  button on the remote control.

• If  

 is displayed on the screen, press the 

 button on

the remote control.

Wrong external mode selected.

• Press the 

 button repeatedly on the remote control

until the RGB symbol 

 is displayed on screen.

Colour level setting.

• Select 

 in the TV menu system then adjust the colour

setting.

• Lift the flap of the remote control and press 

  to

return to the preset factory level.