Sony LBT-ZUX9 User Manual
34
US
Recording onto a tape
There are three ways to record on a
TYPE I (normal) tape.
TYPE I (normal) tape.
CD-TAPE Synchro Recording:
You can record tracks from AUDIO CDs
and MP3 discs onto a tape. The recording
level is adjusted automatically.
and MP3 discs onto a tape. The recording
level is adjusted automatically.
Manual Recording:
You can record just the portion you want
from an audio source, including
connected audio components.
from an audio source, including
connected audio components.
Sound Mixing:
You can “mix” sound from any one of the
audio sources and singing or speaking
into a microphone (not supplied). The
mixed sound can be recorded onto a tape.
audio sources and singing or speaking
into a microphone (not supplied). The
mixed sound can be recorded onto a tape.
1
Load a recordable tape into
Deck B.
Deck B.
Be sure to load the tape with the side
you want to record facing upward.
you want to record facing upward.
2
Prepare the recording source.
For CD-TAPE Synchro Recording:
Press CD and load the disc you want to
record.
record.
Note
You can record tracks on all the discs
in the order you want using Program
Play. Perform steps 2 to 6 of “Creating
your own program” (page 22). When
programming, make sure the playing
times do not exceed the length of one
side of the tape.
in the order you want using Program
Play. Perform steps 2 to 6 of “Creating
your own program” (page 22). When
programming, make sure the playing
times do not exceed the length of one
side of the tape.
For Manual Recording and Sound
Mixing:
Mixing:
Press the function button to select the
source you want to record.
For Sound Mixing, if you want to
record your voice through the
microphone only, you can do so by
selecting the TAPE A function and not
playing any tape.
• When recording from a disc, press
source you want to record.
For Sound Mixing, if you want to
record your voice through the
microphone only, you can do so by
selecting the TAPE A function and not
playing any tape.
• When recording from a disc, press
. or > repeatedly to select a
track during recording pauses.
track during recording pauses.
• To record a folder of MP3 audio
tracks, press PLAY MODE on the
remote repeatedly until “
remote repeatedly until “
”
lights
up in the display. Then, press
+/–
repeatedly to select the folder you want.
3
Set Deck B to stand by for
recording.
recording.
For CD-TAPE Synchro Recording:
Press CD-TAPE SYNC. “SYNC” and
“TAPE” lights up in the display and
“REC” flashes in the display.
“TAPE” lights up in the display and
“REC” flashes in the display.
For Manual Recording and Sound
Mixing:
Mixing:
Press TAPE REC PAUSE/START.
“REC” flashes in the display and
“TAPE” lights up in the display.
“REC” flashes in the display and
“TAPE” lights up in the display.
4
Press TAPE REC PAUSE/
START.
START.
“REC” lights up in the display.
Recording starts. You cannot listen to
other sources while recording.
Recording starts. You cannot listen to
other sources while recording.
To record the
track from
track from
Press PLAY MODE
on the remote
repeatedly to select
on the remote
repeatedly to select
the selected disc 1 DISC.
an MP3 audio
track folder
track folder
. Then, press
+/– repeatedly to
+/– repeatedly to
select the folder you
want.
want.