Sony KV-40XBR700 User Manual

Use this hookup if:

❑

Your cable TV company scrambles some channels, but not all of 
them (pay channels vs. regular cable channels), so you need to 
use a cable box, and

❑

You want to use the Twin View feature.

With this setup you can:

❑

Use the TV remote control to change channels using your cable 
box when the signal is scrambled.

❑

Use the TV remote control to change channels using your TV 
when the signal is not scrambled. (Your TV’s tuner provides a 
better signal than the cable box.)

❑

Use the Twin View feature.

❑

Record both regular CATV and scrambled channels.

To connect a cable box and a VCR, you will need:

❑

A small, inexpensive device known as a splitter.

❑

Three coaxial cables.

❑

Either a combination audio/video cable, or an S VIDEO cable 
and audio cables.

Connect the CATV cable to the single (input) jack of the splitter.

Use a coaxial cable to connect one of the two output jacks of the 
splitter to the TV’s VHF/UHF jack.

Use a coaxial cable to connect the other output jack of the splitter 
to the input jack of the cable box.

Use a coaxial cable to connect the output jack of the cable box to 
the input jack of the VCR.

Use the video line (yellow) of a combination audio/video (A/V) 
cable to connect the video output jack of the VCR to the video 
input jack of the TV.

Connect the left (white) and right (red) audio output channels of 
the VCR to the respective input channels on the TV.

✍

If your VCR has an S VIDEO jack, you can substitute an S VIDEO cable for 
the video line of an A/V cable. The S VIDEO cable will provide improved 
video signal quality. (You will need audio cables for sound.)

(Continued on the next page)