Sony KV-40XBR700 User Manual

If you connect two VCRs, so you can record from one to the other, 
you can connect the recording VCR into your TV to monitor what is 
being recorded. The procedure below shows you how to do this. 

Using an A/V cable, connect the playback VCR’s Audio and 
Video OUT jacks to the recording VCR’s Audio and Video IN 
jacks.

Using an A/V cable, connect the recording VCR’s Audio and 
Video OUT jacks to the TV’s Audio and Video IN jacks. 

To change the video input of the VCR
❑

See your VCR’s user guide for instructions.

To view what is being recorded
❑

Use the remote control to set the TV to the video input to which 
the recording VCR is connected. (VIDEO 1 in the illustration 
above.)

✍

If the VCRs you are connecting have S VIDEO jacks, you can use S VIDEO 
cables for improved picture quality (compared to a combination audio/video 
cable). Because S VIDEO cables carry only the video signal, you will need audio 
cables for sound.