Sony kv-29ls40k User Manual

Level 1

Level 2

Level 3 / Function

NOISE REDUCTION

The “Noise Reduction” option in the “Detail Set Up”
menu allows you to automatically reduce the picture
noise visible in the broadcast signal.

To do this: after selecting the option, press

b. Then

press

v or V to select Auto. Finally press OK to

confirm and store.

To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.

AV2 OUTPUT

The “AV2 Output” option in the “Detail Set Up” menu
allows you to select the source to be output from the
Scart connector

. You can record from this

Scart any signal coming from the TV or from external
equipment connected to the Scart connectors

or side connectors

3 and

If your VCR supports Smartlink, this procedure
is not necessary.

To do this: after selecting the option, press

b. Then

press

v or V to select the desired output signal: TV,

AV1, AV3, YC3 or AUTO.

If you select “AUTO”, the output signal will
always be the same one that is displayed on the
screen.

If you have connected a decoder to the Scart

or to a VCR connected to this Scart,

please remember to change back the “AV2
Output” to “AUTO” or “TV” for correct
unscrambling.

Picture Adjustment

Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset

Set Up

Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up

Detail Set Up

Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:

Auto
TV
0
0