Sony kv-bz212m80 User Manual

4

x

To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV. Use only the supplied screws. Use of other screws may damage
the TV.

Screw the band to the TV stand and
to the provided hole at the rear of
your TV.

(1) Put a cord or chain through the

clamps.

(2) Screw one clamp to a wall or pillar

and the other clamp to the provided
hole at the rear of your TV.

End

Select

Confirm

b

b

Insert the batteries (supplied) into the remote.

Note
• Do not use old or different types of batteries together.

Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.

Tip
• You can also connect your TV to other optional components (see page 8).

Plug in the power cord, then press ! on the TV to turn it on.

Note
• The 1 (standby) indicator flashes green for a few seconds when

turning on the TV. This does not indicate a malfunction.

Set up the TV by following the instructions of the “Initial
Setup” menu (see page 5).

x

01GB04INS-SOEMME.p65

3/6/06, 11:22 PM

4

Black