Sony LIB-81 User Manual
19
Chapter 2 Installation
1
Press the power switch to turn off the power.
2
Use a pointed object such as a machinist’s screwdriver to change the
settings of the DIP switches.
settings of the DIP switches.
3
Press the power switch to turn on the power.
Connecting SCSI Peripheral Devices
SCSI peripheral devices can be connected to the SCSI connectors of the AIT
library. The SCSI configuration of the library is as shown below. Connect the
devices according to the system environment.
library. The SCSI configuration of the library is as shown below. Connect the
devices according to the system environment.
Notes
• The default factory settings of the SCSI IDs are as follows.
- Library:
0
- AIT Drive: 1
• Do not use repetitive SCSI IDs.
Turning the Power On/Off
Turn the Power On
Turn on the AIT library power, then turn on the host computer power.
Library
SCSI Connector 1
Library
Controller
Controller
AIT Drive
SCSI Connector 2